LTL Seattle to Chicago
Book LTL freight from Seattle to Chicago — instant all-in rates from 11 carriers. No fuel surcharge, no liftgate fee, no re-weigh charges.
99.2% damage-free across 715,575+ shipments · $100K carrier liability · Live GPS tracking
Same day LTL Seattle
Pickup available this week on Seattle to Chicago (live availability as of 2026-05-21). $327 per pallet, 5 day transit, all-inclusive. Book at wearewarp.com/ltl/seattle-to-chicago.
Cheapest LTL carrier from Seattle to Chicago
Warp posts the cheapest all-inclusive rate from Seattle to Chicago at $327 per pallet — the rate at booking is the rate invoiced. Carrier base rates from other LTL providers run higher once fuel surcharge, liftgate, and reweigh fees apply.
LTL rates Seattle to Chicago
LTL Seattle to Chicago starts at $327 per pallet on Warp, 5 day transit, all-inclusive. Pickup available this week. Get a live quote at wearewarp.com/ltl/seattle-to-chicago.
Freight cost Seattle to Chicago
Freight from Seattle to Chicago runs $327 per pallet on Warp LTL (1 pallet, 500 lb, all inclusive). 5 day transit. Pickup available this week.
What is the difference between Warp LTL and the other carriers on Warp?
Warp LTL is Warp's own all inclusive cross-dock service. The other carriers on the platform are major LTL providers you can also book on Warp at FAK negotiated rates: national carriers like XPO Logistics, Old Dominion, Estes Express, Saia, FedEx...
What are FAK rates on Warp?
FAK stands for Freight All Kinds. It is a single negotiated rate that applies regardless of the commodity's freight class, typically 15 to 25% lower than class based rates. Direct LTL carriers usually reserve FAK pricing for shippers with $1M+...
How do I book LTL freight on Warp?
Four ways to book LTL Seattle to Chicago on Warp. (1) Instant freight quote portal at customer.wearewarp.com/public/freight-quote. Enter origin ZIP 98101, destination ZIP 60601, pallet count, weight. Book in 60 seconds with a card on file. (2) Pay as you...
Median $346/pallet across 9 ZIP samples
Rate varies by where the freight is picked up in Seattle and where it drops off in Chicago. Each route below connects a pickup zone to a drop-off zone. Click any row to open this quote on Warp. Adjust pallet count, weight, and pickup date to match your shipment, then book.
- Downtown
- City center pickup / drop-off
- Warp cross-dock
- Near a Warp LTL cross-dock facility
- Industrial
- Industrial corridor
Warp LTL plus 10+ major LTL carriers on this lane. One signup, one invoice.
Warp gives you our own all inclusive Warp LTL service plus FAK negotiated rates from major national LTL carriers including XPO Logistics, Old Dominion, Estes Express, Saia, FedEx Freight, ABF Freight, R+L Carriers, TForce Freight, and Forward Air, plus regional specialists like Pitt Ohio, Averitt Express, AAA Cooper, Ward Trucking, Dohrn Transfer, Daylight Transport, and more. Pick the carrier that fits. All on Warp. Warp LTL usually has the lowest all in cost because the rate at booking equals the rate invoiced. The carrier options give you flexibility when you prefer a specific provider for service level or transit reasons.
LTL rates: Seattle to Chicago
1 pallet · 500 lbs · class 70 · all rates as of Apr 21, 2026
+2 more| Carrier — click row to quote | Rate | Transit | vs Warp LTL |
|---|---|---|---|
| Warp LTLWarp Technology's own service · all inclusive | $327All in, surcharge free | 5 days | Lowest |
| RL Carriers | $401 | 5 days | +$74 |
| XPO Logistics | $507 | 5 days | +$180 |
| ESTES | $543 | 4 days | +$216 |
| Forward Air | $625 | 5 days | +$298 |
| AAA COOPER TRANSPORTATION | $692 | 5 days | +$365 |
| SAIA MOTOR FREIGHT LINE LLC | $875 | 5 days | +$548 |
Get your exact rate
Seattle (98101) → Chicago (60601)
$315–$775+ in surcharges Warp doesn't charge
Surcharges the carriers above add after delivery on the Seattle to Chicago lane. Warp's per-pallet rate is the invoice.
| Fee | R+L Carriers | XPO Logistics | Estes Express | Range | Warp |
|---|---|---|---|---|---|
| Fuel surcharge | 26.5% | 27% | 24.7% | 24.7–27.0% | Included |
| Residential delivery | $225 | $180 | $100 | $90–$225 | $0 |
| Liftgate | $225 | $259 | $75 | $75–$259 | $0 |
| Limited access | $225 | $180 | $85 | $85–$225 | $0 |
| Appointment | $0 | $68 | $25 est. | $0–$68 | $0 |
| Notification | $100 | $26 | $30 | $25–$100 | $0 |
| Surcharge stack | $775+ | $713+ | $315+ | $315–$775+ | $0 |
Charges shown for a 1-pallet / 500 lb shipment. Sources: R+L Carriers Rules Tariff (updated Apr 1, 2026), XPO CNWY 199-AK.1 Tariff (eff. Feb 16, 2026), Estes Accessorial Charges (eff. Nov 2025), Eniture LTL Fee Comparison. Read the full Warp tariff →
Quote Seattle to Chicago by API
Pay as you go · Sandbox freeReturns live LTL rates for this lane. No contract, no minimum, no sales call. Pull live rates and book the shipment in the same call. Sandbox keys are issued instantly on signup.
curl -X POST https://www.wearewarp.com/api/v1/freight/quote \
-H "Authorization: Bearer wak_test_YOUR_SANDBOX_KEY" \
-H "Content-Type: application/json" \
-d '{
"pickupZip": "98101",
"deliveryZip": "60601",
"pickupDate": "2026-05-25",
"pallets": 1,
"weightPerPallet": 500,
"mode": "LTL"
}'One signup issues both sandbox and production keys. Quote calls are free. Booking charges the card on file at the rate above.
Ask your AI to quote Seattle to Chicago
MCP · 16 freight toolsDrop the Warp MCP server into Claude Desktop, Claude Code, Cursor, Windsurf, or Continue. Your AI quotes, books, and tracks shipments on this lane from the chat. No portal, no sales call.
1. Add to your MCP config
{
"mcpServers": {
"warp": {
"command": "npx",
"args": [
"-y",
"warp-agent-mcp"
]
}
}
}2. Ask the AI
Quote me Seattle to Chicago, 1 pallet, 500 lbs, pickup next business day.Quote tools require no login. To also book or track, run npx @warpfreight/cli-agent signup once and credentials save to ~/.warp/config.json.
Why Shippers Choose Warp on Seattle to Chicago
How Warp routes the Seattle to Chicago lane
LTL freight from Seattle to Chicago
Seattle to Chicago is served by 10 carriers in the Warp network.
Traditional carrier rates on this lane range from $401 to $875 per pallet with transit times of 4 to 5 days.
Warp prices this lane at $327 per pallet with 5-day transit through the Seattle cross-dock facility.
Seattle is the major freight port of the Pacific Northwest and one of the most complex urban delivery environments in the country.
The port handles significant container volumes from Asia, and the local distribution ecosystem supports Amazon, Boeing, Microsoft, and a dense food and restaurant industry.
Chicago is the largest inland freight hub in North America.
Seven Class I railroads terminate here, and the highway grid funnels I-80, I-90, I-94, I-55, and I-290 into a dense urban core with some of the most complex dock access conditions in the country.
Carbon footprint of LTL freight from Seattle to Chicago
A single pallet moving from Seattle to Chicago over 2,047 miles emits approximately 127 kg CO2e via Warp cross-dock LTL — your pallet's 1 of 26 share of a 53ft dry van on the linehaul leg.
The same truck fully loaded emits about 3,296 kg CO2e on this corridor, which is what a dedicated FTL move would cost at the same mileage regardless of how many pallets ride.
Figures use EPA SmartWay emission factors and cover tank-to-wheel fuel combustion at typical payload.
For a recurring program at 100 pallets per year on this lane, the attributed LTL emissions are approximately 13 metric tons CO2e.
These numbers are suitable for Scope 3 Category 4 estimation under the GHG Protocol; see the Warp carbon methodology page for assumptions, sources, and what is excluded (pickup and delivery legs, empty-mile variance, well-to-tank upstream fuel, vehicle embodied emissions).
Frequently asked questions
How much does LTL shipping cost from Seattle to Chicago?
LTL shipping from Seattle to Chicago starts at $327 per pallet all-inclusive. Traditional carriers on this lane range from $401 to $875 before surcharges.
Warp includes fuel, liftgate, GPS tracking, and proof of delivery in every rate. Enter your shipment details on the Warp platform and get an instant rate in seconds.
How does Warp price LTL freight from Seattle to Chicago?
Warp prices LTL freight on a per pallet basis. On the Seattle to Chicago lane, the rate is $327 per pallet for a standard 500 lb pallet.
The rate is all inclusive with no fuel surcharges, no liftgate fees, and no residential delivery charges. No NMFC codes and no density calculators needed.
What visibility does Warp provide on the Seattle to Chicago lane?
Warp provides live GPS tracking on every shipment from Seattle to Chicago, including scan events at the Seattle and Chicago cross-docks.
Transit on this lane is 5 days through 2 cross-dock facilities instead of 3 to 5 terminals. The Warp driver app delivers proof of delivery photos with electronic signatures on every load.
Orbit monitors each shipment in real time, flagging delays before you need to call.
How long does LTL shipping take from Seattle to Chicago?
Warp LTL transit from Seattle to Chicago is 5 days. Traditional carriers on this lane range from 4 days to 5 days.
Warp transits faster than traditional terminal carriers because freight moves through the Seattle and Chicago cross-docks instead of 3 to 5 terminals.
How does Warp cross docking work on the Seattle to Chicago corridor?
Freight on the Seattle to Chicago lane routes through the Seattle cross-dock near the origin and the Chicago cross-dock near the destination.
Warp sorts and transfers freight for Pacific Northwest retail, tech campus supply chains, and Puget Sound distribution.
Warp sorts and transfers freight for Midwest and Northeast store deliveries, vendor consolidation, and manufacturing distribution.
This eliminates the terminal to terminal routing that adds days to traditional LTL.
Can I get an instant LTL quote from Seattle to Chicago?
Yes. Warp returns a live all-inclusive rate for Seattle to Chicago in seconds. The current 1-pallet rate on this lane is $327 with 10 carriers available for comparison.
No callbacks, no waiting for a rep, and no email quotes. The quote is the invoice with no post-shipment surcharges.
Is Warp cheaper than traditional LTL carriers from Seattle to Chicago?
On this lane, Warp is 18% below the cheapest traditional carrier. The Warp rate of $327 per pallet is all inclusive with no fuel surcharges, no liftgate fees, and no residential delivery charges.
Traditional carriers on Seattle to Chicago range from $401 to $875 before adding surcharges.
What happens if my freight is damaged on the Seattle to Chicago lane?
Every carrier on the Seattle to Chicago lane is vetted through Highway before approval. Authority, insurance, safety rating, and operating status are verified automatically.
Freight is handled at the Seattle cross-dock with scan-level tracking at every handoff, reducing damage risk. Carriers carry Carmack Amendment liability up to $100,000 per shipment.
Warp maintains a $75,000 FMCSA surety bond. Additional cargo insurance up to $1,000,000 per shipment is available through Falvey ($0 deductible on LTL under $10K, 0.30% of declared value).
Warp files, processes, and resolves claims for you.
What is the carbon footprint of shipping one LTL pallet from Seattle to Chicago?
A single pallet moving from Seattle to Chicago via Warp cross-dock LTL emits approximately 127 kg CO2e (tank-to-wheel) — your pallet's 1 of 26 share of a 53ft dry van over the 2,047-mile linehaul leg.
Dedicated FTL on the same lane emits approximately 3,296 kg CO2e regardless of how many pallets are on the truck.
Figures use EPA SmartWay emission factors and are suitable for GHG Protocol Scope 3 Category 4 estimation.
See the Warp carbon methodology page for sources, assumptions, and what is excluded (pickup and delivery legs, empty-mile variance, well-to-tank upstream fuel, vehicle embodied emissions).
How much does LTL freight from Seattle to Chicago cost?
LTL from Seattle to Chicago is $327 per pallet on Warp, all-inclusive. The rate at booking is the rate invoiced. No fuel surcharge, no liftgate fee, no residential or reweigh charges.
Benchmarked against 10 other LTL carriers on this lane. Get an instant quote at wearewarp.com/ltl/seattle-to-chicago.
How fast is LTL shipping from Seattle to Chicago?
5 days transit through Warp's Seattle and Chicago hubs. Pickup available this week. Carrier-direct LTL on this lane runs faster on some routes and slower on others.
See the live comparison table for each carrier's transit.
What is the cheapest LTL carrier from Seattle to Chicago?
On the Seattle to Chicago lane today (2026-04-21), Warp posts the cheapest per-pallet rate at $327, all-inclusive: no fuel surcharge, no liftgate fee, no reweigh charge.
Benchmarked against 10 other LTL carriers.
Can I book LTL from Seattle to Chicago online?
Yes. Quote and book at wearewarp.com/ltl/seattle-to-chicago — enter origin ZIP, destination ZIP, pallet count, and weight, then book in 60 seconds with a card on file.
No sales call, no broker callback, no minimum volume. Pickup available this week.
About the Warp freight network
Ready to ship from Seattle to Chicago?
Get instant per-pallet rates or talk to Warp about a recurring lane program.
Warp2026Auto-applied at checkoutClick below to open the Warp customer portal — $50 is auto-applied at checkout on your first Warp shipment via Stripe.
One time per customer. Valid on your first booked Warp shipment only. Expires Apr 10, 2027. Subject to Warp’s standard terms of service.
99.2% damage-free across 715,575+ shipments · $100K carrier liability · Live GPS tracking