Ocean shipping terms

What is a TEU (twenty-foot equivalent unit)?

How TEUs are counted and what each box holds. Price the freight leg on this page.

Live all-inclusive rates

Where is it going?

Origin

In the US and Canada the carrier prices by ZIP, so a port there is priced by truck at its port area. For your own address, use Postal code.

Destination

US, Canada, Puerto Rico and Europe. Anywhere else, use City.

Load type
Container
How many
1

Continues on shipwithwarp.com with this route filled in. Prices show without an account.

Warp customers

WalmartGopuffKith
Warp · Fast Company Most Innovative Companies 2026
As seen in
1 TEUOne 20 ft container
2 TEUOne 40 ft container
2 TEUOne 40 ft high cube, counted by length
1 FEUOne 40 ft container, equal to 2 TEU

What does TEU stand for?

TEU stands for twenty-foot equivalent unit, a measure of cargo capacity based on the space inside one standard 20 ft shipping container.

The plural is TEUs. The word “equivalent” matters. A TEU isn’t a box you can point at. It’s a yardstick that lets people compare containers of different lengths using one number.

One 20 ft container is 1 TEU. A 40 ft container is 2 TEU, because it’s twice as long. The unit counts space in container slots. It doesn’t measure weight, and it doesn’t tell you the exact cubic meters of cargo you can load.

If you searched “teu meaning” because a port report or a shipping article used the word, that’s the short version: containers counted by length, with the 20 ft as the base unit.

How many TEU is each container size?

A 20 ft container is 1 TEU, and both a 40 ft standard and a 40 ft high cube are 2 TEU.

ContainerTEUInside volume, aboutFloor pallets, about
20 ft standard1About 33 cubic metersAbout 10
40 ft standard2About 67 cubic metersAbout 20 to 21
40 ft high cube2About 76 cubic metersAbout 20 to 21, since it shares the 40 ft floor

A 20 ft container holds about 33 cubic meters, a 40 ft about 67 and a 40 ft high cube about 76. The pallet counts are for standard pallets laid on the floor.

Treat every figure as a guide, not a guarantee. Cargo never fills a box to its full volume, and the real pallet count depends on pallet size and how the load is built. The 40 ft standard and the 40 ft high cube share the same floor, so they take about the same number of pallets. The high cube is about a foot taller, and that height is where its extra volume comes from.

How do you count TEUs?

Count each 20 ft container as 1 and each 40 ft container as 2, then add the two numbers together.

As a formula, TEU equals the number of 20 ft containers plus 2 times the number of 40 ft containers.

Here’s a worked example. A shipment has two 20 ft containers and three 40 ft containers. The two 20 ft containers give 2 TEU. The three 40 ft containers give 3 × 2, which is 6 TEU. Together that’s 2 + 6 = 8 TEU.

Notice that the example has five boxes but eight TEU. The box count and the TEU count are different numbers, so check which one a report or a quote is using before you compare it with anything.

For one order the arithmetic is short. One 20 ft container is 1 TEU, and one 40 ft container is 2.

Why do high cubes and reefers count by length?

TEU counts container length only, so a 40 ft high cube and a refrigerated 40 ft container each count as 2 TEU, the same as a standard 40 ft.

A high cube is a container that’s about a foot taller than a standard one. A standard container is 8 ft 6 in high and a high cube is 9 ft 6 in. The extra height gives a 40 ft high cube more room inside, about 76 cubic meters against about 67, but it doesn’t change its length.

A refrigerated container, often called a reefer, keeps cargo cold or frozen. It’s counted the same way, by length. A 40 ft reefer is 2 TEU, just like a dry 40 ft.

That’s why TEU is a rough measure. Two containers can both be 2 TEU and still hold different volumes. The number tells you how many length units of container you’re talking about, not what fits inside.

Where is TEU used?

TEU is the unit for ship capacity, port and terminal volumes, and the volumes that ocean carriers and trade reports quote.

  • Ship capacity: a container ship’s size is stated in TEU, the number of container slots it has.
  • Ports and terminals: the volume a port or terminal handles is stated in TEU.
  • Ocean carriers and trade volumes: the boxes a carrier moves, and the trade figures built from them, are counted in TEU.

A ship’s TEU figure is a count of container slots. How many loaded containers the ship actually carries also depends on their weight, so a ship can reach its weight limit before every slot is used.

As an importer you’ll mostly see TEU in port reports and shipping news. It isn’t the unit on your own booking, which is covered below.

What is the difference between TEU and FEU?

A TEU is a 20 ft container equivalent and an FEU is a 40 ft one, so 1 FEU equals 2 TEU.

FEU stands for forty-foot equivalent unit. It means one 40 ft container. If someone counts in FEU, they’re counting 40 ft boxes, and each one is worth 2 TEU.

TEUFEUWhat you book
What it measuresCapacity in 20 ft unitsCapacity in 40 ft unitsNeither. You book a container by its size
A 20 ft container1 TEUHalf an FEUA 20 ft container
A 40 ft container2 TEU1 FEUA 40 ft standard or a 40 ft high cube
Who uses itShip, port, terminal and carrier volume figuresThe same counts in 40 ft units, used less oftenYou, the importer, choosing a container size

Capacity and volume figures are usually stated in TEU rather than FEU. Converting between them is one step: multiply FEU by 2 to get TEU, or divide TEU by 2 to get FEU.

Why do importers book per container instead of per TEU?

Full container (FCL) freight is quoted and booked per container: a 20 ft, a 40 ft or a 40 ft high cube, not a number of TEU.

TEU is a counting unit for ships and ports. Your price and your booking are for the box. A 40 ft container is one booking, even though it counts as 2 TEU.

A shared container, called LCL for less than a container load, works differently. Your cargo travels with other shippers’ cargo, and LCL freight is priced by cubic meters or by weight, not by TEU.

On Warp an origin port plus a container size and a US ZIP returns priced booking options from real sailing schedules. For the steps from choosing a size to booking it, see how to book an ocean container. To estimate what a container costs to ship, the ocean freight calculator is a good place to start.

How do you convert cbm to TEU?

There’s no fixed conversion from cubic meters to TEU, because cargo never fills a container to its full volume.

CBM means cubic meters, the volume your cargo takes up. TEU measures container space, so the two don’t line up one to one. Gaps between cartons, the shape of the load and the way pallets stack all use space that the volume figure counts as available.

Use the container capacities as a guide instead. A 20 ft container holds about 33 cubic meters, a 40 ft about 67 and a 40 ft high cube about 76.

Work out your cargo’s cubic meters from your carton or pallet sizes first. If the total sits comfortably under the 20 ft figure, a 20 ft container is the one to look at. If it’s near that figure or over it, compare a 40 ft. Very small loads can also go LCL, priced by cubic meters or weight.

What are a container’s outside dimensions?

A standard container is 8 ft wide and 8 ft 6 in high, and either 20 ft or 40 ft long.

A high cube has the same length and width, but it’s 9 ft 6 in high. That’s the one foot of extra height behind its larger inside volume.

Outside dimensions tell you how much room a container takes up. For what fits inside, use the cubic meters and pallet counts in the table above, because the walls and floor take up part of the outside size.

What happens to the container at a US port?

At a US port the container is either trucked inland as it is, or its contents are moved into domestic trailers.

Moving the whole container by truck on a chassis is called drayage. Moving the contents into domestic trailers for the inland leg is called transloading. Which one fits depends on where your cargo is going.

Frequently asked questions

What does TEU mean?

TEU means twenty-foot equivalent unit. It’s a unit of cargo capacity based on the volume of one standard 20 ft shipping container, so one 20 ft container is 1 TEU.

How many TEU is a 40 ft container?

A 40 ft container is 2 TEU. It’s twice as long as a 20 ft container, and TEU counts length. A 40 ft container is also called 1 FEU, the forty-foot equivalent unit.

Is a 40 ft high cube 2 TEU?

Yes. Counting goes by length, not height, so a 40 ft high cube is 2 TEU, the same as a standard 40 ft container. Refrigerated containers are counted by length too.

What is FEU in shipping?

FEU stands for forty-foot equivalent unit and means one 40 ft container. One FEU equals 2 TEU, so a shipment of three 40 ft containers is 3 FEU, or 6 TEU.

How many pallets fit in a TEU?

A 20 ft container, which is 1 TEU, takes roughly 10 standard pallets on the floor. A 40 ft container, which is 2 TEU, takes roughly 20 to 21. Real counts depend on the pallet size and the load.

How many cubic meters is 1 TEU?

A 20 ft container, which is 1 TEU, holds about 33 cubic meters. There’s no fixed conversion, because cargo never fills a box to its full volume, so use the capacities as a guide.

Do I pay per TEU when I import?

No. Full container freight is quoted and booked per container, a 20 ft, a 40 ft or a 40 ft high cube. Shared container (LCL) freight is priced by cubic meters or weight.

Does a ship’s TEU number mean it carries that many full containers?

Not always. A ship’s TEU figure is a count of container slots. How many loaded containers it carries also depends on their weight, so weight can limit the load before the slots are full.

About the Warp freight network

More about the Warp freight network
70+cross-dock facilities
6,800+Warp LTL lanes
14,000+vans & box trucks
24,000+vetted FTL carriers

Warp is the open source freight network: the tech is free and the network is open. We run Warp LTL, our own carrier, Warp FTL, cargo van, box truck and fulfillment ourselves, with every major LTL carrier, parcel, ocean, air and drayage plugged in beside them. Our driver app rides on every truck and our warehouse app runs every cross-dock, so an open network of 38,000+ carriers behaves like one carrier you control. Warp is licensed by the FMCSA as a property broker and freight forwarder, and runs the network itself: instant rates, live tracking, 70+ cross-dock facilities, 14,000+ cargo vans and box trucks, 80%+ US LTL zip-to-zip coverage and nationwide FTL, box truck and cargo van.

The network is supported by 24,000+ vetted FTL carriers.

Unlike traditional brokers, Warp uses AI to match the right vehicle to every load based on weight, dimensions, urgency, and cost targets. Cross-dock operations reduce transit time by eliminating unnecessary terminal transfers.

Pool distribution and zone-skipping programs help enterprise shippers lower per-unit delivery costs while maintaining tight appointment windows.

Self-serve shippers can quote, compare, and book freight online in under two minutes. Enterprise accounts get dedicated capacity planning, committed rate programs, and a named operations team. Every shipment includes scan-level visibility from pickup through final delivery.

Warp operates across the contiguous United States with regional density in the Southeast, Texas, Midwest, and Northeast corridors, and West Coast and Southwest coverage from Los Angeles, Seattle and Phoenix.

Warp operates 70+ cross-dock facilities across the US, with named markets including Chicago, Atlanta, Houston, New York, Savannah, Orlando, Charlotte, Indianapolis, Columbus, Denver, New Orleans, Milwaukee, Dallas-Fort Worth, Nashville, Phoenix, Tampa Bay, Seattle, Los Angeles. They support faster transfers and fewer touches on recurring lanes.

Freight modes and vehicle types

ModeMax payloadMax cubeBest for
Cargo van3,500 lbs400 cu ftTime-sensitive, last-mile, light pallets
Box truck10,000 lbs1,500 cu ftRegional distribution, no dock required
LTLPer-palletShared trailerLower per-pallet cost via cross-dock routing
Dry van / FTL42,000+ lbsFull 53-ft trailerHigh-volume lanes, recurring programs

Cargo vans handle loads up to 3,500 pounds and 400 cubic feet, ideal for time-sensitive deliveries, last-mile retail replenishment, and lightweight palletized freight.

Box trucks carry up to 10,000 pounds and 1,500 cubic feet, fitting most regional distribution and store delivery needs without requiring a loading dock.

Dry vans and full truckloads move 42,000+ pounds for high-volume lanes and recurring programs. LTL shipments share trailer space on optimized routes through Warp cross-docks, reducing per-pallet cost by consolidating multiple shippers on the same vehicle.

Warp does not default every shipment to a 53-foot trailer. The AI engine evaluates load weight, cube, delivery window, and cost to recommend the right vehicle. Shippers see all available mode options with live pricing in one comparison screen before booking.

Cross-dock operations

Cross-docking at Warp facilities keeps freight moving instead of storing it: inbound freight is sorted and transferred directly to outbound vehicles, typically within hours. When inventory does need to sit, Warp's fulfillment centers in Los Angeles, Dallas, Chicago and New Jersey hold it inside the same network, with same day delivery within 30 miles of each.

This reduces dwell time, lowers damage risk, and compresses delivery windows. Warp cross-docks support pallet-in, pallet-out operations with scan-level tracking at every handoff point.

  • Atlanta — Southeast retail flow
  • Chicago — Midwest manufacturing and replenishment
  • Houston — Texas industrial distribution
  • New York — dense Northeast delivery

Facility locations are selected for corridor density: Atlanta handles Southeast retail flow, Chicago serves Midwest manufacturing and replenishment, Houston covers Texas industrial distribution, and New York supports dense Northeast delivery. Each facility operates on appointment-based scheduling to prevent congestion and maintain throughput consistency.

Enterprise freight programs

Enterprise shippers get committed rate programs, dedicated account management, and custom SLA design. Warp builds lane-by-lane rate structures that account for volume commitments, seasonal variation, and mode flexibility. Operations teams monitor shipment execution daily and intervene proactively when exceptions occur.

Self-serve freight quoting

Shippers enter origin and destination, load details, and delivery requirements to see live rates across all available modes. Quotes include estimated transit time, vehicle type, and total cost.

Booking takes one click. After booking, shippers track every shipment with real-time GPS location, milestone updates, and proof of delivery documentation.

Industries and use cases

Retail shippers use Warp for store replenishment programs that deliver to hundreds of locations per week on tight appointment windows. Apparel brands use zone skipping to bypass regional parcel sortation and reduce per-unit delivery cost.

Food and beverage companies rely on time-definite delivery for perishable goods. Manufacturing operations use Warp for inbound vendor consolidation, combining multiple supplier shipments into fewer, fuller loads through cross-dock facilities.

Distribution companies use pool distribution to serve multiple delivery points from a single origin, splitting full truckloads at cross-docks into smaller last-mile vehicles.

Urgent freight recovery covers emergency capacity needs when primary carriers fail or demand spikes unexpectedly. Middle-mile optimization reduces cost and transit time on the longest segment of multi-leg shipments.

Price the container, not the TEU.

A TEU counts container space for ships and ports, and you book a 20 ft, a 40 ft or a 40 ft high cube. Choose your size, then price the freight leg here.

Performance figures are computed from Warp network data. See our methodology.

$50off your first shipmentGet your rate