MPF and HMF: the two US Customs fees on your import
Both US Customs import fees, with rates and examples. Price the container on this page.
Live all-inclusive rates
Warp customers
What is the merchandise processing fee (MPF)?
The merchandise processing fee (MPF) is a US Customs user fee charged on imported goods, worked out as a percentage of the goods’ value.
CBP, US Customs and Border Protection, is the agency that clears goods coming into the country. MPF is one of the fees it collects for processing an import entry. It shows up as its own line, apart from any duty.
It’s charged on each formal entry. A formal entry is the standard customs declaration for goods above the informal limit, which the next sections cover. The fee is based on the value of the goods as entered, which is generally the value on your commercial invoice.
That’s why a clean, accurate invoice matters. If the value on the invoice is wrong, every fee that’s based on it is wrong too, and the mistake travels from the seller’s paperwork into your customs entry.
Because it’s a user fee and not a tariff, MPF doesn’t depend on the product’s duty rate. Two shipments of the same value on a formal entry carry the same MPF, even if their duty rates are very different.
What is the MPF rate, minimum and maximum for fiscal year 2027?
For fiscal year 2027, which started October 1, 2026, MPF is 0.3464% of the goods’ value, with a $34.58 minimum and a $670.86 maximum per formal entry.
Those figures come from CBP Dec. 26-14, fiscal year 2027 (from October 1, 2026). The percentage stayed the same as the year before. The minimum and the maximum are adjusted for inflation each fiscal year, so the dollar figures change every October.
The minimum means a small shipment never pays less than $34.58 in MPF on a formal entry. The maximum means a large shipment never pays more than $670.86 on one entry, however high the goods’ value goes.
If you’re reading this after the next October 1, check CBP’s current figures before you rely on the dollar amounts here.
The same goes for any older figure you find online. Guides written for a previous fiscal year show a different minimum and maximum, and the table further down uses only the fiscal year 2027 amounts.
How does MPF work on informal entries, and which goods are exempt?
Goods valued at $2,500 or less are eligible for an informal entry, which pays a small flat MPF instead of the percentage.
For fiscal year 2027, the flat MPF is $2.77 for an automated informal entry not prepared by CBP. Above $2,500, the shipment is a formal entry in the ordinary case. CBP can still require a formal entry on a lower value, so the limit isn’t a promise.
Some goods are exempt from MPF. Goods that qualify under the USMCA, the trade agreement with Canada and Mexico, and under several other US free trade agreements pay no MPF when the importer claims the preference on the entry.
CBP publishes which agreements qualify. Whether your goods do is a question for a licensed customs broker, who can check the origin rules against your product.
The word to watch is claims. The exemption isn’t automatic because a product is made in a partner country. The importer has to claim the preference on the entry, so tell your broker early if you think your goods qualify.
What is the harbor maintenance fee (HMF)?
The harbor maintenance fee (HMF) is 0.125% of the value of commercial cargo loaded or unloaded from a commercial vessel at a US port.
HMF is a user fee too, set by 19 CFR 24.24, ocean cargo only. On an import, it’s paid with the entry, alongside MPF.
Unlike MPF, HMF has no minimum and no maximum. It’s the same 0.125% on a small container and on a very large one, so the fee grows in a straight line with the goods’ value.
Like MPF, it’s a separate charge from duty. Neither one is a tariff, and neither depends on the product’s HTS code.
HMF is the one of the two fees that an ocean import pays and an air import doesn’t. On a very high value container it can be a meaningful line, so it belongs in your landed cost from the start.
How do you calculate MPF and HMF?
Multiply the goods’ value by the MPF rate and hold the result between the minimum and the maximum, then multiply the value by the HMF rate and add the two.
Here’s the sum at three invoice values, worked out from the fiscal year 2027 figures above. HMF is shown as it applies to ocean cargo.
| Goods value | MPF | HMF (ocean) | Both |
|---|---|---|---|
| $5,000.00 | $34.58 | $6.25 | $40.83 |
| $50,000.00 | $173.20 | $62.50 | $235.70 |
| $250,000.00 | $670.86 | $312.50 | $983.36 |
At $5,000.00 the percentage works out to $17.32, so the minimum applies; at $50,000.00 the percentage works out to $173.20, so the percentage applies; at $250,000.00 the percentage works out to $866.00, so the cap applies.
One formal entry can cover many invoice lines. The MPF minimum and maximum apply per entry, not per line, so how goods are grouped onto entries can change the total. A customs broker has the specifics for your shipments.
The table also shows why the two fees feel so different. MPF is held between a floor and a ceiling, so it flattens out on large entries. HMF has no floor and no ceiling, so it keeps rising with the goods’ value on every row.
How are MPF, HMF and duty different?
MPF and HMF are user fees CBP collects, while duty is set by the tariff schedule for your product, so each is worked out on its own basis.
| Charge | What it’s based on | Who sets it | Applies to air? |
|---|---|---|---|
| MPF | Value of the goods on a formal entry, with a minimum and a maximum | CBP user fee, amounts adjusted each fiscal year | Yes |
| HMF | Value of cargo moving by commercial vessel | CBP user fee under 19 CFR 24.24 | No |
| Duty | The HTS rate for the product, plus any additional duty | The US tariff schedule | Yes |
Duty is set by the product’s HTS code, the US tariff classification, plus any additional duty that applies to it. This page doesn’t cover duty rates. The HTS code lookup in the related pages below is the place to start.
Who pays MPF and HMF, and when?
The importer of record pays MPF and HMF with the entry, and both are reported on CBP Form 7501, the entry summary.
The importer of record is the party named on the entry as responsible for the import. That party is liable for duties and fees, which includes both of these.
In practice that is often the buyer of the goods, but not always. When a seller ships on DDP terms, the seller takes on the import costs, so the contract decides who the fees land on.
On Form 7501, each fee is reported with a collection code: 499 for formal MPF, 311 for informal MPF and 501 for HMF. If you’re reading a customs invoice or a broker’s statement, those codes tell you which line is which.
On Warp, the ocean price to a door includes the customs entry and ISF filing fees; duty, MPF, HMF and the bond are billed to the importer after arrival.
The entry is also separate from the ISF, the security filing made before the container loads abroad. A licensed customs broker can tell you the payment timing and the filing steps for your entry.
If you ever see a fee on a customs statement that you can’t match to a code, ask your broker which line it is before you pay it.
Do MPF and HMF apply to air freight and exports?
MPF applies to air freight, but HMF doesn’t, because HMF is charged only on cargo moving by commercial vessel.
If you import by air on a formal entry, you still pay MPF on the goods’ value, with the same minimum and maximum. You don’t pay HMF, since the cargo never touches a vessel.
Exports are a different question. HMF isn’t collected on exports, because a 1998 US Supreme Court decision held the fee unconstitutional as applied to exports. Both fees described here are import fees.
So an ocean import carries both fees and an air import carries MPF only. That’s one more reason the freight mode matters when you compare landed costs.
It also means the same invoice can produce a different fee total by sea and by air. When you compare modes, compare the whole landed cost, with duty and the other lines in place, not the freight price alone.
Where do MPF and HMF fit in your landed cost?
Landed cost adds the goods, the freight, duty, any additional duty, MPF, HMF and the customs bond, so the two fees are part of the total, not extras.
The bond is easy to miss. A single entry customs bond is about $5.50 per $1,000 of declared value, with a $55.00 minimum, as Warp states it. An importer with an annual bond pays none of that. It’s surety pricing, not a federal fee.
Duty comes from the HTS code, and the two fees here come from the value and the mode. Who carries each cost can also depend on the Incoterms in your sales contract, so check them before you ship.
Landed cost is a number you can only trust once every line is in it. Leaving out MPF, HMF or the bond makes a quote look cheaper than the final bill.
The landed cost calculator adds captured ocean freight, duty, MPF, HMF and the bond into one total and a per unit cost. Use it to see how much of a total the fees account for on your own goods.
How does Warp price an import?
Warp prices and books ocean and air live, and the quote card at the top of this page prices a container from Shanghai.
Warp prices and books ocean and air live, but it isn’t a licensed ocean forwarder or a customs broker; licensed partners file the US customs entry and the ISF, and when a price ends at a door those fees are itemized in it.
On the Oct 20, 2026 Shanghai to Los Angeles container, the US customs entry was $49.75, inside the freight price.
The card at the top shows the freight leg for a 40 ft high cube container. Add the fees from this page to that price when you work out what the shipment costs you at the door.
Work in the same order each time: price the freight, add duty from the HTS code, add MPF and HMF from the value, then add the bond if you don’t hold an annual one. That gives you a landed cost you can compare across suppliers and modes.
Frequently asked questions
What is the MPF fee for 2027?
For fiscal year 2027, from October 1, 2026, the MPF is 0.3464% of the goods’ value on a formal entry, with a minimum of $34.58 and a maximum of $670.86.
The rate stayed the same as the year before, and the dollar limits are adjusted each fiscal year.
Is HMF charged on air freight?
No. The harbor maintenance fee applies to cargo loaded or unloaded from a commercial vessel, so air freight doesn’t pay it. MPF can still apply to an air import.
Is MPF a duty?
No. MPF is a user fee CBP collects for processing the entry, based on the goods’ value. Duty is set by the product’s HTS code. They’re separate charges on the same entry.
Who pays the merchandise processing fee?
The importer of record, which is the party liable for duties and fees on the entry. The fee is reported on CBP Form 7501, the entry summary.
What is the minimum and maximum MPF per entry?
For fiscal year 2027 the minimum is $34.58 and the maximum is $670.86 per formal entry. Both are adjusted for inflation each fiscal year, so they change every October.
Do I pay HMF on exports?
No. HMF isn’t collected on exports, because a 1998 US Supreme Court decision held the fee unconstitutional as applied to exports.
Are USMCA goods exempt from MPF?
Goods that qualify under the USMCA, and under several other US free trade agreements, are exempt from MPF when the importer claims the preference on the entry.
A licensed customs broker can confirm whether your goods qualify.
What are the MPF and HMF collection codes on Form 7501?
On CBP Form 7501, formal MPF is reported with code 499, informal MPF with code 311 and HMF with code 501.
About the Warp freight network
More about the Warp freight network
Warp is the open source freight network: the tech is free and the network is open. We run Warp LTL, our own carrier, Warp FTL, cargo van, box truck and fulfillment ourselves, with every major LTL carrier, parcel, ocean, air and drayage plugged in beside them. Our driver app rides on every truck and our warehouse app runs every cross-dock, so an open network of 38,000+ carriers behaves like one carrier you control. Warp is licensed by the FMCSA as a property broker and freight forwarder, and runs the network itself: instant rates, live tracking, 70+ cross-dock facilities, 14,000+ cargo vans and box trucks, 80%+ US LTL zip-to-zip coverage and nationwide FTL, box truck and cargo van.
The network is supported by 24,000+ vetted FTL carriers.
Unlike traditional brokers, Warp uses AI to match the right vehicle to every load based on weight, dimensions, urgency, and cost targets. Cross-dock operations reduce transit time by eliminating unnecessary terminal transfers.
Pool distribution and zone-skipping programs help enterprise shippers lower per-unit delivery costs while maintaining tight appointment windows.
Self-serve shippers can quote, compare, and book freight online in under two minutes. Enterprise accounts get dedicated capacity planning, committed rate programs, and a named operations team. Every shipment includes scan-level visibility from pickup through final delivery.
Warp operates across the contiguous United States with regional density in the Southeast, Texas, Midwest, and Northeast corridors, and West Coast and Southwest coverage from Los Angeles, Seattle and Phoenix.
Warp operates 70+ cross-dock facilities across the US, with named markets including Chicago, Atlanta, Houston, New York, Savannah, Orlando, Charlotte, Indianapolis, Columbus, Denver, New Orleans, Milwaukee, Dallas-Fort Worth, Nashville, Phoenix, Tampa Bay, Seattle, Los Angeles. They support faster transfers and fewer touches on recurring lanes.
Freight modes and vehicle types
| Mode | Max payload | Max cube | Best for |
|---|---|---|---|
| Cargo van | 3,500 lbs | 400 cu ft | Time-sensitive, last-mile, light pallets |
| Box truck | 10,000 lbs | 1,500 cu ft | Regional distribution, no dock required |
| LTL | Per-pallet | Shared trailer | Lower per-pallet cost via cross-dock routing |
| Dry van / FTL | 42,000+ lbs | Full 53-ft trailer | High-volume lanes, recurring programs |
Cargo vans handle loads up to 3,500 pounds and 400 cubic feet, ideal for time-sensitive deliveries, last-mile retail replenishment, and lightweight palletized freight.
Box trucks carry up to 10,000 pounds and 1,500 cubic feet, fitting most regional distribution and store delivery needs without requiring a loading dock.
Dry vans and full truckloads move 42,000+ pounds for high-volume lanes and recurring programs. LTL shipments share trailer space on optimized routes through Warp cross-docks, reducing per-pallet cost by consolidating multiple shippers on the same vehicle.
Warp does not default every shipment to a 53-foot trailer. The AI engine evaluates load weight, cube, delivery window, and cost to recommend the right vehicle. Shippers see all available mode options with live pricing in one comparison screen before booking.
Cross-dock operations
Cross-docking at Warp facilities keeps freight moving instead of storing it: inbound freight is sorted and transferred directly to outbound vehicles, typically within hours. When inventory does need to sit, Warp's fulfillment centers in Los Angeles, Dallas, Chicago and New Jersey hold it inside the same network, with same day delivery within 30 miles of each.
This reduces dwell time, lowers damage risk, and compresses delivery windows. Warp cross-docks support pallet-in, pallet-out operations with scan-level tracking at every handoff point.
- Atlanta — Southeast retail flow
- Chicago — Midwest manufacturing and replenishment
- Houston — Texas industrial distribution
- New York — dense Northeast delivery
Facility locations are selected for corridor density: Atlanta handles Southeast retail flow, Chicago serves Midwest manufacturing and replenishment, Houston covers Texas industrial distribution, and New York supports dense Northeast delivery. Each facility operates on appointment-based scheduling to prevent congestion and maintain throughput consistency.
Enterprise freight programs
Enterprise shippers get committed rate programs, dedicated account management, and custom SLA design. Warp builds lane-by-lane rate structures that account for volume commitments, seasonal variation, and mode flexibility. Operations teams monitor shipment execution daily and intervene proactively when exceptions occur.
Self-serve freight quoting
Shippers enter origin and destination, load details, and delivery requirements to see live rates across all available modes. Quotes include estimated transit time, vehicle type, and total cost.
Booking takes one click. After booking, shippers track every shipment with real-time GPS location, milestone updates, and proof of delivery documentation.
Industries and use cases
Retail shippers use Warp for store replenishment programs that deliver to hundreds of locations per week on tight appointment windows. Apparel brands use zone skipping to bypass regional parcel sortation and reduce per-unit delivery cost.
Food and beverage companies rely on time-definite delivery for perishable goods. Manufacturing operations use Warp for inbound vendor consolidation, combining multiple supplier shipments into fewer, fuller loads through cross-dock facilities.
Distribution companies use pool distribution to serve multiple delivery points from a single origin, splitting full truckloads at cross-docks into smaller last-mile vehicles.
Urgent freight recovery covers emergency capacity needs when primary carriers fail or demand spikes unexpectedly. Middle-mile optimization reduces cost and transit time on the longest segment of multi-leg shipments.
Price the freight, then add the two CBP fees.
MPF and HMF are set by the goods’ value, so you can work them out before you ship. Price the container here and add the fees to the total.
Performance figures are computed from Warp network data. See our methodology.
