HS code chapter 84: Nuclear reactors, boilers, machinery and mechanical appliances
Chapter 84 of the Harmonized Tariff Schedule of the United States: Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof. It holds 86 headings, 8401 to 8487, and 1,706 ten digit US HTS codes.
General duty rates in the chapter run from Free to 9.9%, and 931 codes (55%) enter free of general duty. The highest percent rates sit under 8482 (9.9%), 8466 (8%), 8406 (6.7%).
The 86 headings in chapter 84
Each four digit heading with its HTS codes and the span of their general duty rates.
| Heading | Description | HTS codes | General duty |
|---|---|---|---|
| 8401 | Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation; parts thereof | 4 | 2.6% to 3.3% |
| 8402 | Steam or other vapor generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers; parts thereof | 6 | 3.3% to 5.2% |
| 8403 | Central heating boilers (other than those of heading 8402) and parts thereof | 2 | Free |
| 8404 | Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economizers, super-heaters, soot removers, gas recoverers); condensers for steam or other vapor power units; parts thereof | 4 | 3.5% to 5% |
| 8405 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers; parts thereof | 2 | Free |
| 8406 | Steam turbines and other vapor turbines, and parts thereof | 19 | Free to 6.7% |
| 8407 | Spark-ignition reciprocating or rotary internal combustion piston engines | 47 | Free to 2.5% |
| 8408 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines) | 17 | Free to 2.5% |
| 8409 | Parts suitable for use solely or principally with the engines of heading 8407 or 8408 | 22 | Free to 2.5% |
| 8410 | Hydraulic turbines, water wheels and regulators therefor; parts thereof | 4 | 3.8% |
| 8411 | Turbojets, turbopropellers and other gas turbines, and parts thereof | 27 | Free to 2.5% |
| 8412 | Other engines and motors, and parts thereof | 28 | Free |
| 8413 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; part thereof | 45 | Free to 2.5% |
| 8414 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters; parts thereof | 57 | Free to 4.7% |
| 8415 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated; parts thereof | 30 | Free to 2.2% |
| 8416 | Furnace burners for liquid fuel, for pulverized solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances; parts thereof | 5 | Free |
| 8417 | Industrial or laboratory furnaces and ovens, including incinerators, nonelectric, and parts thereof | 4 | 2.9% to 3.9% |
| 8418 | Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps, other than the air conditioning machines of heading 8415; parts thereof | 36 | Free to 1.9% |
| 8419 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, nonelectric; parts thereof | 39 | Free to 4.2% |
| 8420 | Calendering or other rolling machines, other than for metals or glass, and cylinders therefor; parts thereof | 10 | Free to 3.5% |
| 8421 | Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases; parts thereof | 24 | Free to 2.5% |
| 8422 | Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labeling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages; parts thereof | 33 | Free to 2.4% |
| 8423 | Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds; parts of weighing machinery | 17 | Free to 2.9% |
| 8424 | Mechanical appliances (whether or not hand operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting machines; parts thereof | 20 | Free to 2.9% |
| 8425 | Pulley tackle and hoists other than skip hoists; winches and capstans; jacks | 7 | Free |
| 8426 | Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane | 12 | Free |
| 8427 | Fork-lift trucks; other works trucks fitted with lifting or handling equipment | 13 | Free |
| 8428 | Other lifting, handling, loading or unloading machinery (for example, elevators, escalators, conveyors, teleferics) | 12 | Free |
| 8429 | Self-propelled bulldozers, angledozers, graders, levelers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers | 42 | Free |
| 8430 | Other moving, grading, leveling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snowplows and snowblowers | 19 | Free |
| 8431 | Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 | 44 | Free |
| 8432 | Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports ground rollers; parts thereof | 22 | Free |
| 8433 | Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof | 31 | Free |
| 8434 | Milking machines and dairy machinery, and parts thereof | 3 | Free |
| 8435 | Presses, crushers and similar machinery, used in the manufacture of wine, cider, fruit juices or similar beverages; parts thereof | 2 | Free |
| 8436 | Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders; parts thereof | 16 | Free |
| 8437 | Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, and parts thereof; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm type machinery; parts thereof | 5 | Free |
| 8438 | Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils; parts thereof | 14 | Free to 2.8% |
| 8439 | Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard (other than the machinery of heading 8419); parts thereof | 9 | Free |
| 8440 | Bookbinding machinery, including book-sewing machines, and parts thereof | 2 | Free |
| 8441 | Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds, and parts thereof | 6 | Free |
| 8442 | Machinery, apparatus and equipment (other than the machines of headings 8456 to 8465), for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished); parts thereof | 5 | Free |
| 8443 | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof | 43 | Free to 3.3% |
| 8444 | Machines for extruding, drawing, texturing or cutting man-made textile materials | 2 | Free |
| 8445 | Machines for preparing textile fibers; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447 | 10 | Free to 3.7% |
| 8446 | Weaving machines (looms) | 11 | Free to 3.7% |
| 8447 | Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting | 15 | Free to 2.6% |
| 8448 | Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions and shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles) | 21 | Free to 3.7% |
| 8449 | Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof | 2 | Free to 2.6% |
| 8450 | Household- or laundry-type washing machines, including machines which both wash and dry; parts thereof | 11 | 1% to 2.6% |
| 8451 | Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof | 14 | Free to 3.5% |
| 8452 | Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles; parts thereof | 10 | Free to 2.5% |
| 8453 | Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines; parts thereof | 5 | Free |
| 8454 | Converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries, and parts thereof | 10 | Free |
| 8455 | Metal-rolling mills and rolls therefor; parts thereof | 14 | Free |
| 8456 | Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electro-discharge, electro-chemical, electron-beam, ionic-beam or plasma arc processes; water-jet cutting machines | 21 | Free to 3.5% |
| 8457 | Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal | 12 | 3.3% to 4.2% |
| 8458 | Lathes (including turning centers) for removing metal | 22 | 4.2% to 4.4% |
| 8459 | Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centers) of heading 8458 | 41 | 3.3% to 4.2% |
| 8460 | Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461 | 32 | 4.4% |
| 8461 | Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included | 33 | 4.4% to 5.8% |
| 8462 | Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above | 71 | 4.4% |
| 8463 | Other machine tools for working metal or cermets, without removing material | 12 | 4.4% |
| 8464 | Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass | 5 | Free to 2% |
| 8465 | Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials | 78 | 2.4% to 3% |
| 8466 | Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand | 36 | Free to 8% |
| 8467 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof | 39 | Free to 4.5% |
| 8468 | Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515; gas-operated surface tempering machines and appliances; parts thereof | 7 | Free to 3.9% |
| 8470 | Calculating machines and pocket-size data recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers | 9 | Free |
| 8471 | Automatic data processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included | 28 | Free |
| 8472 | Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or wrapping machines, pencil-sharpening machines, perforating or stapling machines) | 10 | Free to 1.8% |
| 8473 | Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472 | 14 | Free to 2% |
| 8474 | Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or molding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry molds of sand; parts thereof | 16 | Free |
| 8475 | Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware; parts thereof | 5 | Free |
| 8476 | Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines; parts thereof | 5 | Free |
| 8477 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof | 28 | Free to 3.1% |
| 8478 | Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter; parts thereof | 4 | Free |
| 8479 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof | 41 | Free to 2.8% |
| 8480 | Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics | 19 | Free to 3.8% |
| 8481 | Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof | 61 | Free to 5.6% |
| 8482 | Ball or roller bearings, and parts thereof | 56 | 2.4% to 9.9% |
| 8483 | Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof | 47 | Free to 5.7% |
| 8484 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals | 3 | 2.5% to 3.9% |
| 8485 | Machines for additive manufacturing | 6 | Free to 3.1% |
| 8486 | Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(C) to this chapter; parts and accessories | 7 | Free |
| 8487 | Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, and not specified or included elsewhere in this chapter | 4 | Free to 3.9% |
The most common general duty rates in chapter 84
| General duty rate | HTS codes |
|---|---|
| Free | 931 |
| 4.4% | 168 |
| 2.5% | 67 |
| 3% | 61 |
| 4.2% | 61 |
| 3.1% | 37 |
| 5.8% | 36 |
| 2.4% | 32 |
Chapter 84 notes
The legal notes at the head of the chapter decide what it covers and what it leaves to other chapters, so read them before you settle on a heading. They are the schedule’s own text, 2,601 words.
Read the chapter 84 notes
Notes
1. This chapter does not cover:
(a) Millstones, grindstones or other articles of chapter 68;
(b) Machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (chapter 69);
(c) Laboratory glassware (heading 7017); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 7019 or 7020);
(d) Articles of heading 7321 or 7322 or similar articles of other base metals (chapters 74 to 76 or 78 to 81);
(e) Vacuum cleaners of heading 8508;
(f) Electromechanical domestic appliances of heading 8509; digital cameras of heading 8525;
(g) Radiators for the articles of section XVII; or
(h) Hand-operated mechanical floor sweepers, not motorized (heading 9603).
2. Subject to the operation of note 3 to section XVI and subject to note 11 to this chapter, a machine or appliance which answers to a description in one or more of the headings 8401 to 8424, or heading 8486 and at the same time to a description in one or more of the headings 8425 to 8480 is to be classified under the appropriate heading of the former group or under heading 8486, as the case may be, and not the latter group.
(A) Heading 8419 does not, however, cover:
(i) Germination plant, incubators or brooders (heading 8436);
(ii) Grain dampening machines (heading 8437);
(iii) Diffusing apparatus for sugar juice extraction (heading 8438);
(iv) Machinery for the heat-treatment of textile yarns, fabrics or made up textile articles (heading 8451); or
(v) Machinery, plant or laboratory equipment, designed for a mechanical operation, in which a change of temperature, even if necessary, is subsidiary.
(B) Heading 8422 does not cover:
(i) Sewing machines for closing bags or similar containers (heading 8452); or
(ii) Office machinery of heading 8472.
(C) Heading 8424 does not cover:
(i) Ink-jet printing machines (heading 8443); or
(ii) Water-jet cutting machines (heading 8456).
3. A machine tool for working any material which answers to a description in heading 8456 and at the same time to a description in heading 8457, 8458, 8459, 8460, 8461, 8464 or 8465 is to be classified in heading 8456.
4. Heading 8457 applies only to machine tools for working metal, other than lathes (including turning centers), which can carry out different types of machining operations either:
(a) by automatic tool change from a magazine or the like in conformity with a machining program (machining centers),
(b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station), or
(c) by the automatic transfer of the workpiece to different unit heads (multi-station transfer machines).
5. For the purposes of heading 8462, a ?slitting line? for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A ?cut-to-length line? for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear.
6.
(A) For the purposes of heading 8471, the expression "automatic data processing machines" means machines capable of :
(i) Storing the processing program or programs and at least the data immediately necessary for the execution of the program;
(ii) Being freely programmed in accordance with the requirements of the user;
(iii) Performing arithmetical computations specified by the user; and
(iv) Executing, without human intervention, a processing program which requires them to modify their execution, by logical decision during the processing run.
(B) Automatic data processing machines may be in the form of systems consisting of a variable number of separate units.
(C) Subject to paragraphs (D) and (E) below, a unit is to be regarded as being part of an automatic data processing system if it meets all of the following conditions :
(i) It is of a kind solely or principally used in an automatic data processing system;
(ii) It is connectable to the central processing unit either directly or through one or more other units; and
(iii) It is able to accept or deliver data in a form (codes or signals) which can be used by the system.
Separately presented units of an automatic data processing machine are to be classified in heading 8471.
However, keyboards, X-Y co-ordinate input devices and disk storage units which satisfy the conditions of paragraphs (C) (ii) and (C) (iii) above, are in all cases to be classified as units of heading 8471.
(D) Heading 8471 does not cover the following when presented separately, even if they meet all of the conditions set forth in note 6 (C) above :
(i) Printers, copying machines, facsimile machines, whether or not combined;
(ii) Apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network);
(iii) Loudspeakers and microphones;
(iv) Television cameras, digital cameras and video camera recorders;
(v) Monitors and projectors, not incorporating television reception apparatus.
(E) Machines incorporating or working in conjunction with an automatic data processing machine and performing a specific function other than data processing are to be classified in the headings appropriate to their respective functions or, failing that, in residual headings.
7. Heading 8482 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 percent or by more than 0.05 mm, whichever is less. Other steel balls are to be classified under heading 7326.
8. A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose.
Subject to note 2 to this chapter and note 3 to section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 8479. Heading 8479 also covers machines for making rope or cable (for example, stranding, twisting or cabling machines) from metal wire, textile yarn or any other material or from a combination of such materials.
9. For the purposes of heading 8470, the term "pocket-size" applies only to machines the dimensions of which do not exceed 170 mm x 100 mm x 45 mm.
10. For the purposes of heading 8485, the expression ?additive manufacturing? (also referred to as 3D printing) means the formation of physical objects, based on a digital model, by the successive addition and layering, and consolidation and solidification, of material (for example, metal, plastics or ceramics).
Subject to note 1 to section XVI and note 1 to chapter 84, machines answering to the description in heading 8485 are to be classified in that heading and in no other heading of the tariff schedule.
11.
(A) Notes 12(a) and 12(b) to chapter 85 also apply with respect to the expressions "semiconductor devices" and "electronic integrated circuits", respectively, as used in this Note and in heading 8486. However, for the purposes of this Note and of heading 8486, the expression "semiconductor devices" also covers photosensitive semiconductor devices and light emitting diodes (LED).
(B) For the purposes of this note and of heading 8486, the expression "manufacture of flat panel displays" covers the fabrication of substrates into a flat panel. It does not cover the manufacture of glass or the assembly of printed circuit boards or other electronic components onto the flat panel. The expression "flat panel display" does not cover cathode-ray tube technology.
(C) Heading 8486 also includes machines and apparatus solely or principally of a kind used for :
(i) the manufacture or repair of masks and reticles;
(ii) assembling semiconductor devices or electronic integrated circuits;
(iii) lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays.
(D) Subject to Note 1 to Section XVI and Note 1 to Chapter 84, machines and apparatus answering to the description in heading 8486 are to be classified in that heading and in no other heading of the tariff schedule.
Subheading Notes
1. For the purposes of subheading 8465.20, the term ?machining centers? applies only to machine tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining program.
2. For the purposes of subheading 8471.49, the term "systems" means automatic data processing machines whose units satisfy the conditions laid down in note 6(C) to chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).
3. For the purposes of subheading 8481.20, the expression ?valves for oleohydraulic or pneumatic transmissions? means valves which are used specifically in the transmission of ?fluid power? in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481.20 takes precedence over all other subheadings of heading 8481.
4. Subheading 8482.40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.
Additional U.S. Notes
1. For the purposes of subheadings 8479.89.65 and 8479.89.95, the rate of duty "Free (C)" appearing in the column entitled "1-Special" applies only to the following articles: nonelectric starter motors; propeller regulators, nonelectric; servo-mechanisms, nonelectric; windshield wipers, nonelectric; hydropneumatic accumulators; pneumatic starters for turbojets, turbopropellers, or other gas turbines; toilet units specially designed for aircraft; mechanical actuators for thrust reversers.
2. Subheading 8443.99.20 covers the following parts of printer units of subheading 8443.32.10:
(a) Control or command assemblies, incorporating more than one of the following: printed circuit assembly, hard or flexible (floppy) disk drive, keyboard, user interface;
(b) Light source assemblies, incorporating more than one of the following: light emitting diode assembly, gas laser, mirror polygon assembly, base casting;
(c) Laser imaging assemblies, incorporating more than one of the following: photoreceptor belt or cylinder, toner receptacle unit, toner developing unit, charge/discharge units, cleaning unit;
(d) Image fixing assemblies, incorporating more than one of the following: fuser, pressure roller, heating element, release oil dispenser, cleaning unit, electrical control;
(e) Ink jet marking assemblies, incorporating more than one of the following: thermal print head, ink dispensing unit, nozzle and reservoir unit, ink heater;
(f) Maintenance/sealing assemblies, incorporating more than one of the following: vacuum unit, ink jet covering unit, sealing unit, purging unit;
(g) Paper handling assemblies, incorporating more than one of the following: paper transport belt, roller, print bar, carriage, gripper roller, paper storage unit, exit tray;
(h) Thermal transfer imaging assemblies, incorporating more than one of the following: thermal print head, cleaning unit, supply or take-up roller;
(ij) Ionographic imaging assemblies, incorporating more than one of the following: ion generation and emitting unit, air assist unit, printed circuit assembly, charge receptor belt or cylinder, toner receptacle unit, toner distribution unit, developer receptacle and distribution unit, developing unit, charge/discharge unit, cleaning unit; or
(k) Combinations of the above specified assemblies.
3. Subheading 8443.99.30 covers the following parts of facsimile machines:
(a) Control or command assemblies, incorporating more than one of the following: printed circuit assembly, modem, hard or flexible (floppy) disk drive, keyboard, user interface;
(b) Optics module assemblies, incorporating more than one of the following: optics lamp, charge couples device and appropriate optics, lenses, mirrors;
(c) Laser imaging assemblies, incorporating more than one of the following: photoreceptor belt or cylinder, toner receptacle unit, toner developing unit, charge/discharge units, cleaning unit;
(d) Ink jet marking assemblies, incorporating more than one of the following: thermal print head, ink dispensing unit, nozzle and reservoir unit, ink heater;
(e) Thermal transfer imaging assemblies, incorporating more than one of the following: thermal print head, cleaning unit, supply or take-up roller;
(f) Ionographic imaging assemblies, incorporating more than one of the following: ion generation and emitting unit, air assist unit, printed circuit assembly, charge receptor belt or cylinder, toner receptacle unit, toner distribution unit, developer receptacle and distribution unit, developing unit, charge/discharge unit, cleaning unit;
(g) Image fixing assemblies, incorporating more than one of the following: fuser, pressure roller, heating elements, release oil dispenser, cleaning unit, electrical control;
(h) Paper handling assemblies, incorporating more than one of the following: paper transport belt, roller, print bar, carriage, gripper roller, paper storage unit, exit tray; and
(ij) Combinations of the above specified assemblies.
4. Subheading 8443.99.40 covers the following parts of photocopying apparatus of subheading 8443.39.20:
(a) Imaging assemblies, incorporating more than one of the following: photoreceptor belt or cylinder, toner receptacle unit, toner distribution unit, developer receptacle unit, developer distribution unit, charge/discharge unit, cleaning unit;
(b) Optics assemblies, incorporating more than one of the following: lens, mirror, illumination source, document exposure glass;
(c) User control assemblies, incorporating more than one of the following: printed circuit assembly, power supply, user input keyboard, wiring harness, display unit (cathode ray type or flat panel);
(d) Image fixing assemblies, incorporating more than one of the following: fuser, pressure rollers, heating elements, release oil dispenser, cleaning unit, electrical controls;
(e) Paper handling assemblies, incorporating more than one of the following: paper transport belt, roller, print bar, carriage, gripper roller, paper storage unit, exit tray; or
(f) Combinations of the above specified assemblies.
Statistical Notes
1. For the purposes of statistical reporting numbers 8411.81.8010 and 8411.82.8010, the term ?industrial turbines? means only gas turbines used in stationary applications, including those for the purposes of stationary power generation.
2. Wind turbine blades shall be counted individually and not as blade sets.
3. For the purposes of statistical reporting number 8413.91.9031, the term "sucker rods" includes pony rods and polished rods, all designed for use in oil well and oil field related pumps.
4. For the purposes of statistical reporting numbers, 8413.91.9041, 8413.91.9044, 8413.91.9046 and 8413.91.9059, ?of copper or copper alloys? refers to all parts of pumps, regardless of pump configuration or method of operation, made of copper or copper alloys.
5. For the purposes of statistical reporting numbers 8427.10.8020, 8427.10.8040, 8427.10.8070, 8427.20.8020 and 8427.90.0020, the term "aerial work platforms" means works trucks that incorporate a platform, attached to a lift mechanism mounted on a mobile base, for lifting personnel, tools and materials.
6. For the purposes of statistical reporting number 8472.90.9040, the term ?note counters and note scanners? means document handling machines that count currency bills, bank notes, coupons, script or other value-based paper documents and to stack them in an organized fashion. Note counters and note scanners can both incorporate a sensor for detecting suspect (i.e., counterfeit) documents. Note scanners have additional sensors that enable the machines to distinguish documents by denomination.
7. For the purposes of statistical reporting numbers 8479.89.9510 and 8479.90.9510, the subsequent diagnosis, testing, or analysis is typically of a type performed by the instruments, appliances, and apparatuses of Chapter 90.
8. For the purposes of heading 8482, balls of copper or copper alloy refers to copper balls where the maximum and minimum diameters of the sphere do not differ from the nominal diameter by more than 0.5 percent. Other copper balls are the classified under heading 7419.
9. For the purposes of statistical reporting number 8483.40.5020, the term "gear boxes and speed changers for wind turbines" refers to all configurations of gear boxes and speed changers designed for wind turbines, including fixed ratio, multiple ratio, and variable ratio speed changers.
Section XVI: the 2 chapters
- Chapter 84: Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof (this chapter)
- Chapter 85: Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026. Chapter notes read November 16, 2026.