HS code 8462: Machine tools for working metal by forging
Heading 8462 of the Harmonized Tariff Schedule of the United States reads: “Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above.”
It holds 71 ten digit US HTS codes under 20 international HS subheadings. General duty rates run from 4.4%; the most common is 4.4%, on 71 codes. 18 US trade programs list a Free special rate on at least one code.
What a container of 8462 costs at your door
- Ports with a captured rate
- China
- ShanghaiCNSGH
- Shenzhen (Yantian)CNYTN
- QingdaoCNQIN
- GuangzhouCNGGZ
- XiamenCNXMN
- TianjinCNTSN
- South Korea
- BusanKRPUS
- Taiwan
- KaohsiungTWKHH
- Vietnam
- Ho Chi Minh CityVNSGN
- India
- Mumbai (Nhava Sheva)INBOM
- ChennaiINMAA
- Taiwan
- TaipeiTWTPE
- South Korea
- Seoul (Incheon)KRINC
- US ports from Shenzhen (Yantian)
- Los AngelesUSLAX
- New YorkUSEWR
- SavannahUSSAV
- HoustonUSHOU
- SeattleUSSEA
- OaklandUSOAK
- CharlestonUSCHS
- MiamiUSMIA
- BaltimoreUSBAL
- JacksonvilleUSJAX
4.4%, the general rate on every code under 8462.
| Goods Your invoice value | $60,000.00 |
| Ocean freight to a door near the port Captured October 27, 18 days, entry and ISF filing fees included | $8,269.78 |
| Duty at 4.4% Your HTS rate on the goods value | $2,640.00 |
| Section 301, China 12.5% since July 24, 2026 | $7,500.00 |
| Merchandise processing fee 0.3464% of value | $207.84 |
| Harbor maintenance fee 0.125% of value, ocean only | $75.00 |
| Single entry bond About $5.50 per $1,000, $55 minimum | $330.00 |
| Landed cost | $79,022.62 |
Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.
The percent rate under 8462 is 4.4%, so the calculator starts there. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.
All 71 HTS codes under heading 8462
A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.
| HTS code | Description | General | Special | Column 2 | Units | |
|---|---|---|---|---|---|---|
| Hot forming machines for forging, die forging (including presses) and hot hammers | ||||||
| 8462.11.00Closed die forging machines | ||||||
| 8462.11.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| Other | ||||||
| 8462.11.00.30 | Headers and upsetters | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.11.00.35 | Mechanical transfer presses | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.11.00.55 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.19.00Other | ||||||
| 8462.19.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| Other | ||||||
| 8462.19.00.30 | Headers and upsetters | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.19.00.35 | Mechanical transfer presses | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.19.00.55 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| Bending, folding, straightening or flattening machines (including press brakes) for flat products | ||||||
| 8462.22.00Profile forming machines | ||||||
| 8462.22.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.22.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.22.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.23.00Numerically controlled press brakes | ||||||
| 8462.23.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.23.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.23.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.24.00Numerically controlled panel benders | ||||||
| 8462.24.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.24.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.24.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.25.00Numerically controlled roll forming machines | ||||||
| 8462.25.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.25.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.25.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.26.00Other numerically controlled bending, folding, straightening or flattening machines | ||||||
| 8462.26.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.26.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.26.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.29.00Other | ||||||
| 8462.29.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.29.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| Other | ||||||
| 8462.29.00.30 | Press brakes | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.29.00.40 | Bending rolls | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.29.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines | ||||||
| 8462.32Slitting lines and cut-to-length lines | ||||||
| 8462.32.10Numerically controlled | ||||||
| 8462.32.10.40 | Used or rebuilt | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.32.10.80 | Other | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.32.50Other | ||||||
| 8462.32.50.10 | Used or rebuilt | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.32.50.20 | Other, valued under $3,025 each | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.32.50.50 | Other | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.33.00Numerically controlled shearing machines | ||||||
| 8462.33.00.40 | Used or rebuilt | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.33.00.80 | Other | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.39.00Other | ||||||
| 8462.39.00.10 | Used or rebuilt | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.39.00.20 | Other, valued under $3,025 each | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.39.00.50 | Other | 4.4% | Free (A*, | 30% | No. | Price it |
| Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines | ||||||
| 8462.42.00Numerically controlled | ||||||
| 8462.42.00.40 | Used or rebuilt | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.42.00.80 | Other | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.49.00Other | ||||||
| 8462.49.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.49.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.49.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| Machines for working tube, pipe, hollow section and bar (excluding presses) | ||||||
| 8462.51.00Numerically controlled | ||||||
| 8462.51.00.40 | Used or rebuilt | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.51.00.80 | Other | 4.4% | Free (A*, | 30% | No. | Price it |
| 8462.59.00Other | ||||||
| 8462.59.00.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.59.00.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.59.00.50 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| Cold metal working presses | ||||||
| 8462.61Hydraulic presses | ||||||
| 8462.61.40Numerically controlled | ||||||
| 8462.61.40.30 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.61.40.60 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.61.80Other | ||||||
| 8462.61.80.30 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.61.80.90 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.62Mechanical presses | ||||||
| 8462.62.40Numerically controlled | ||||||
| 8462.62.40.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.62.40.30 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.62.50Other | ||||||
| 8462.62.50.30 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.62.50.90 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.63Servo-presses | ||||||
| 8462.63.40Numerically controlled | ||||||
| 8462.63.40.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.63.40.30 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.63.80Other | ||||||
| 8462.63.80.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.63.80.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.63.80.60 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.69Other | ||||||
| 8462.69.40Numerically controlled | ||||||
| 8462.69.40.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.69.40.30 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.69.80Other | ||||||
| 8462.69.80.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.69.80.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.69.80.60 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.90Other | ||||||
| 8462.90.40Numerically controlled | ||||||
| 8462.90.40.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.90.40.30 | Other | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.90.80Other | ||||||
| 8462.90.80.10 | Used or rebuilt | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.90.80.20 | Other, valued under $3,025 each | 4.4% | Free (A, | 30% | No. | Price it |
| 8462.90.80.60 | Other | 4.4% | Free (A, | 30% | No. | Price it |
HS subheadings under 8462
Heading 8462 splits into 20 six digit subheadings, the international level of the code; the United States adds four digits to each.
| HS subheading | Description | HTS codes | General duty |
|---|---|---|---|
| 8462.11 | Hot forming machines for forging, die forging (including presses) and hot hammers: Closed die forging machines | 4 | 4.4% |
| 8462.19 | Hot forming machines for forging, die forging (including presses) and hot hammers: Other | 4 | 4.4% |
| 8462.22 | Bending, folding, straightening or flattening machines (including press brakes) for flat products: Profile forming machines | 3 | 4.4% |
| 8462.23 | Bending, folding, straightening or flattening machines (including press brakes) for flat products: Numerically controlled press brakes | 3 | 4.4% |
| 8462.24 | Bending, folding, straightening or flattening machines (including press brakes) for flat products: Numerically controlled panel benders | 3 | 4.4% |
| 8462.25 | Bending, folding, straightening or flattening machines (including press brakes) for flat products: Numerically controlled roll forming machines | 3 | 4.4% |
| 8462.26 | Bending, folding, straightening or flattening machines (including press brakes) for flat products: Other numerically controlled bending, folding, straightening or flattening machines | 3 | 4.4% |
| 8462.29 | Bending, folding, straightening or flattening machines (including press brakes) for flat products: Other | 5 | 4.4% |
| 8462.32 | Slitting lines and cut-to-length lines | 5 | 4.4% |
| 8462.33 | Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines: Numerically controlled shearing machines | 2 | 4.4% |
| 8462.39 | Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines: Other | 3 | 4.4% |
| 8462.42 | Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines: Numerically controlled | 2 | 4.4% |
| 8462.49 | Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines: Other | 3 | 4.4% |
| 8462.51 | Machines for working tube, pipe, hollow section and bar (excluding presses): Numerically controlled | 2 | 4.4% |
| 8462.59 | Machines for working tube, pipe, hollow section and bar (excluding presses): Other | 3 | 4.4% |
| 8462.61 | Hydraulic presses | 4 | 4.4% |
| 8462.62 | Mechanical presses | 4 | 4.4% |
| 8462.63 | Servo-presses | 5 | 4.4% |
| 8462.69 | Other | 5 | 4.4% |
| 8462.90 | Other | 5 | 4.4% |
Duty rates under heading 8462 at a glance
71 codes carry a percent of value. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs at 30%. The entry reports quantity in No..
Trade programs in the special column
Lower rates under US trade programs, each named by its General Note 3 symbol, for goods that qualify under the program’s rules of origin and claim it on the entry. Under heading 8462:
| Program | Symbol | Codes naming it | At Free |
|---|---|---|---|
| African Growth and Opportunity Act | D | 71 | 71 |
| Caribbean Basin Economic Recovery Act | E | 71 | 71 |
| Dominican Republic-Central America-United States Free Trade Agreement Implementation Act | P | 71 | 71 |
| Generalized System of Preferences | A, A* | 71 | 71 |
| United States-Australia Free Trade Agreement | AU | 71 | 71 |
| United States-Bahrain Free Trade Agreement Implementation Act | BH | 71 | 71 |
| United States-Chile Free Trade Agreement | CL | 71 | 71 |
| United States-Colombia Trade Promotion Agreement Implementation Act | CO | 71 | 71 |
| United States-Israel Free Trade Area | IL | 71 | 71 |
| United States-Jordan Free Trade Area Implementation Act | JO | 71 | 71 |
| United States-Korea Free Trade Agreement Implementation Act | KR | 71 | 71 |
| United States-Mexico-Canada Agreement | S | 71 | 71 |
| United States-Morocco Free Trade Agreement Implementation Act | MA | 71 | 71 |
| United States-Oman Free Trade Agreement Implementation Act | OM | 71 | 71 |
| United States-Panama Trade Promotion Agreement Implementation Act | PA | 71 | 71 |
| United States-Peru Trade Promotion Agreement Implementation Act | PE | 71 | 71 |
| United States-Singapore Free Trade Agreement | SG | 71 | 71 |
| Trade Agreement Between the United States and Japan | JP | 43 | 43 |
Other headings in chapter 84
The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 84, nuclear reactors, boilers, machinery and mechanical appliances, holds 86 headings: see all of chapter 84.
- 8459: Machine tools for drilling, boring, milling (41 codes, 3.3% to 4.2%)
- 8460: Machine tools for deburring, sharpening, grinding, honing (32 codes, 4.4%)
- 8461: Machine tools for planing, shaping, slotting, broaching (33 codes, 4.4% to 5.8%)
- 8463: Other machine tools for working metal or cermets (12 codes, 4.4%)
- 8464: Machine tools for working stone, ceramics, concrete (5 codes, Free to 2%)
- 8465: Machine tools for working wood, cork, bone, hard rubber (78 codes, 2.4% to 3%)
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.