HS code 8465: Machine tools for working wood, cork, bone, hard rubber
Heading 8465 of the Harmonized Tariff Schedule of the United States reads: “Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials.”
It holds 78 ten digit US HTS codes under 9 international HS subheadings. General duty rates run from 2.4% to 3%; the most common is 3%, on 53 codes. 18 US trade programs list a Free special rate on at least one code.
What a container of 8465 costs at your door
- Ports with a captured rate
- China
- ShanghaiCNSGH
- Shenzhen (Yantian)CNYTN
- QingdaoCNQIN
- GuangzhouCNGGZ
- XiamenCNXMN
- TianjinCNTSN
- South Korea
- BusanKRPUS
- Taiwan
- KaohsiungTWKHH
- Vietnam
- Ho Chi Minh CityVNSGN
- India
- Mumbai (Nhava Sheva)INBOM
- ChennaiINMAA
- Taiwan
- TaipeiTWTPE
- South Korea
- Seoul (Incheon)KRINC
- US ports from Shenzhen (Yantian)
- Los AngelesUSLAX
- New YorkUSEWR
- SavannahUSSAV
- HoustonUSHOU
- SeattleUSSEA
- OaklandUSOAK
- CharlestonUSCHS
- MiamiUSMIA
- BaltimoreUSBAL
- JacksonvilleUSJAX
3%, the general rate on 53 of the 78 codes under 8465.
| Goods Your invoice value | $60,000.00 |
| Ocean freight to a door near the port Captured October 27, 18 days, entry and ISF filing fees included | $8,269.78 |
| Duty at 3% Your HTS rate on the goods value | $1,800.00 |
| Section 301, China 12.5% since July 24, 2026 | $7,500.00 |
| Merchandise processing fee 0.3464% of value | $207.84 |
| Harbor maintenance fee 0.125% of value, ocean only | $75.00 |
| Single entry bond About $5.50 per $1,000, $55 minimum | $330.00 |
| Landed cost | $78,182.62 |
Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.
General duty rates under 8465 run from 2.4% to 3%, and the calculator starts at 3%, the most common. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.
All 78 HTS codes under heading 8465
A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.
| HTS code | Description | General | Special | Column 2 | Units | |
|---|---|---|---|---|---|---|
| 8465.10.00Machines which can carry out different types of machining operations without tool change between such operations | ||||||
| Woodworking machines | ||||||
| Used or rebuilt | ||||||
| 8465.10.00.05 | Tenoners | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.10.00.15 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| Tenoners | ||||||
| 8465.10.00.25 | Numerically controlled | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.10.00.35 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.10.00.45 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.10.00.50 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.20Machining centers | ||||||
| 8465.20.10.00 | For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising | 3% | Free (A, | 35% | No. | Price it |
| 8465.20.50.00 | For bending or assembling | 2.9% | Free (A, | 35% | No. | Price it |
| 8465.20.80.00 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| 8465.91.00Sawing machines | ||||||
| Woodworking machines | ||||||
| Used or rebuilt | ||||||
| 8465.91.00.02 | Rip saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.06 | Panel saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.12 | Band saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.16 | Cross-cut and optimizing saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.22 | Other | 3% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| 8465.91.00.27 | Sawmill machines | 3% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| 8465.91.00.32 | Radial arm saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.36 | Tilting arbor table saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.41 | Rip saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.47 | Miter saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.49 | Scroll saws | 3% | Free (A, | 35% | No. | Price it |
| Panel saws | ||||||
| 8465.91.00.53 | Valued under $3,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.58 | Other | 3% | Free (A, | 35% | No. | Price it |
| Band saws | ||||||
| 8465.91.00.64 | Valued under $1,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.68 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.74 | Cross-cut and optimizing saws | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.78 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.91.00.91 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00Planing, milling or molding (by cutting) machines | ||||||
| For woodworking | ||||||
| Used or rebuilt | ||||||
| 8465.92.00.03 | Moulders | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.06 | Routers | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.16 | Other | 3% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| Dovetailing machines | ||||||
| 8465.92.00.26 | Valued under $3,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.29 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.31 | Moulders | 3% | Free (A, | 35% | No. | Price it |
| Planers | ||||||
| 8465.92.00.34 | Valued under $1,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.37 | Other | 3% | Free (A, | 35% | No. | Price it |
| Jointers | ||||||
| 8465.92.00.42 | Valued under $1,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.46 | Other | 3% | Free (A, | 35% | No. | Price it |
| Routers | ||||||
| 8465.92.00.51 | Valued under $3,000 each | 3% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| 8465.92.00.55 | Numerically controlled | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.58 | Other | 3% | Free (A, | 35% | No. | Price it |
| Shapers and profilers | ||||||
| 8465.92.00.62 | Valued under $1,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.66 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.72 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.92.00.91 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.93.00Grinding, sanding or polishing machines | ||||||
| For woodworking | ||||||
| Used or rebuilt | ||||||
| 8465.93.00.04 | Belt sanders, for a belt width 60 cm or wider | 3% | Free (A, | 35% | No. | Price it |
| 8465.93.00.12 | Other | 3% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| Edge belt sanders | ||||||
| 8465.93.00.30 | Valued under $1,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.93.00.45 | Valued $1,000 or over but under $3,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.93.00.55 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.93.00.65 | Belt sanders, for a belt width 60 cm or wider | 3% | Free (A, | 35% | No. | Price it |
| 8465.93.00.75 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.93.00.91 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.94.00Bending or assembling machines | ||||||
| For woodworking | ||||||
| 8465.94.00.05 | Used or rebuilt | 2.9% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| 8465.94.00.15 | Doweling machines | 2.9% | Free (A, | 35% | No. | Price it |
| 8465.94.00.25 | Edgebanding machines | 2.9% | Free (A, | 35% | No. | Price it |
| 8465.94.00.35 | Laminating machines | 2.9% | Free (A, | 35% | No. | Price it |
| Presses | ||||||
| 8465.94.00.45 | Cold | 2.9% | Free (A, | 35% | No. | Price it |
| 8465.94.00.55 | Other | 2.9% | Free (A, | 35% | No. | Price it |
| 8465.94.00.65 | Other | 2.9% | Free (A, | 35% | No. | Price it |
| 8465.94.00.91 | Other | 2.9% | Free (A, | 35% | No. | Price it |
| 8465.95.00Drilling or mortising machines | ||||||
| For woodworking | ||||||
| Used or rebuilt | ||||||
| 8465.95.00.05 | Numerically controlled boring machines | 3% | Free (A, | 35% | No. | Price it |
| 8465.95.00.10 | Other | 3% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| Boring machines | ||||||
| 8465.95.00.20 | Numerically controlled | 3% | Free (A, | 35% | No. | Price it |
| Other | ||||||
| 8465.95.00.35 | Valued under $3,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.95.00.45 | Other | 3% | Free (A, | 35% | No. | Price it |
| Other drilling machines | ||||||
| 8465.95.00.55 | Valued under $1,000 each | 3% | Free (A, | 35% | No. | Price it |
| 8465.95.00.60 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.95.00.65 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.95.00.91 | Other | 3% | Free (A, | 35% | No. | Price it |
| 8465.96.00Splitting, slicing or paring machines | ||||||
| For woodworking | ||||||
| 8465.96.00.15 | Log splitters | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.96.00.25 | Chippers | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.96.00.30 | Hogs | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.96.00.40 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.96.00.51 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.99.02Other | ||||||
| Woodworking machines | ||||||
| 8465.99.02.10 | Debarkers | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.99.02.20 | Lathes | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.99.02.30 | Other | 2.4% | Free (A, | 35% | No. | Price it |
| 8465.99.02.50 | Other | 2.4% | Free (A, | 35% | No. | Price it |
HS subheadings under 8465
Heading 8465 splits into 9 six digit subheadings, the international level of the code; the United States adds four digits to each.
| HS subheading | Description | HTS codes | General duty |
|---|---|---|---|
| 8465.10 | Machines which can carry out different types of machining operations without tool change between such operations | 6 | 2.4% |
| 8465.20 | Machining centers | 3 | 2.4% to 3% |
| 8465.91 | Other: Sawing machines | 18 | 3% |
| 8465.92 | Other: Planing, milling or molding (by cutting) machines | 17 | 3% |
| 8465.93 | Other: Grinding, sanding or polishing machines | 8 | 3% |
| 8465.94 | Other: Bending or assembling machines | 8 | 2.9% |
| 8465.95 | Other: Drilling or mortising machines | 9 | 3% |
| 8465.96 | Other: Splitting, slicing or paring machines | 5 | 2.4% |
| 8465.99 | Other: Other | 4 | 2.4% |
Duty rates under heading 8465 at a glance
78 codes carry a percent of value. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs at 35%. The entry reports quantity in No..
| General duty rate | HTS codes |
|---|---|
| 3% | 53 |
| 2.4% | 16 |
| 2.9% | 9 |
Trade programs in the special column
Lower rates under US trade programs, each named by its General Note 3 symbol, for goods that qualify under the program’s rules of origin and claim it on the entry. Under heading 8465:
| Program | Symbol | Codes naming it | At Free |
|---|---|---|---|
| African Growth and Opportunity Act | D | 78 | 78 |
| Caribbean Basin Economic Recovery Act | E | 78 | 78 |
| Dominican Republic-Central America-United States Free Trade Agreement Implementation Act | P | 78 | 78 |
| Generalized System of Preferences | A | 78 | 78 |
| United States-Australia Free Trade Agreement | AU | 78 | 78 |
| United States-Bahrain Free Trade Agreement Implementation Act | BH | 78 | 78 |
| United States-Chile Free Trade Agreement | CL | 78 | 78 |
| United States-Colombia Trade Promotion Agreement Implementation Act | CO | 78 | 78 |
| United States-Israel Free Trade Area | IL | 78 | 78 |
| United States-Jordan Free Trade Area Implementation Act | JO | 78 | 78 |
| United States-Korea Free Trade Agreement Implementation Act | KR | 78 | 78 |
| United States-Mexico-Canada Agreement | S | 78 | 78 |
| United States-Morocco Free Trade Agreement Implementation Act | MA | 78 | 78 |
| United States-Oman Free Trade Agreement Implementation Act | OM | 78 | 78 |
| United States-Panama Trade Promotion Agreement Implementation Act | PA | 78 | 78 |
| United States-Peru Trade Promotion Agreement Implementation Act | PE | 78 | 78 |
| United States-Singapore Free Trade Agreement | SG | 78 | 78 |
| Trade Agreement Between the United States and Japan | JP | 25 | 25 |
Other headings in chapter 84
The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 84, nuclear reactors, boilers, machinery and mechanical appliances, holds 86 headings: see all of chapter 84.
- 8462: Machine tools for working metal by forging (71 codes, 4.4%)
- 8463: Other machine tools for working metal or cermets (12 codes, 4.4%)
- 8464: Machine tools for working stone, ceramics, concrete (5 codes, Free to 2%)
- 8466: Parts and accessories (36 codes, Free to 8%)
- 8467: Tools for working in the hand, pneumatic (39 codes, Free to 4.5%)
- 8468: Machinery and apparatus for soldering, brazing or welding (7 codes, Free to 3.9%)
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.