HS code 8482: Ball or roller bearings, and parts thereof
Heading 8482 of the Harmonized Tariff Schedule of the United States reads: “Ball or roller bearings, and parts thereof.”
It holds 56 ten digit US HTS codes under 8 international HS subheadings. General duty rates run from 2.4% to 9.9%; the most common is 5.8%, on 29 codes. 18 US trade programs list a Free special rate on at least one code.
What a container of 8482 costs at your door
- Ports with a captured rate
- China
- ShanghaiCNSGH
- Shenzhen (Yantian)CNYTN
- QingdaoCNQIN
- GuangzhouCNGGZ
- XiamenCNXMN
- TianjinCNTSN
- South Korea
- BusanKRPUS
- Taiwan
- KaohsiungTWKHH
- Vietnam
- Ho Chi Minh CityVNSGN
- India
- Mumbai (Nhava Sheva)INBOM
- ChennaiINMAA
- Taiwan
- TaipeiTWTPE
- South Korea
- Seoul (Incheon)KRINC
- US ports from Shenzhen (Yantian)
- Los AngelesUSLAX
- New YorkUSEWR
- SavannahUSSAV
- HoustonUSHOU
- SeattleUSSEA
- OaklandUSOAK
- CharlestonUSCHS
- MiamiUSMIA
- BaltimoreUSBAL
- JacksonvilleUSJAX
5.8%, the general rate on 29 of the 56 codes under 8482.
| Goods Your invoice value | $60,000.00 |
| Ocean freight to a door near the port Captured October 27, 18 days, entry and ISF filing fees included | $8,269.78 |
| Duty at 5.8% Your HTS rate on the goods value | $3,480.00 |
| Section 301, China 12.5% since July 24, 2026 | $7,500.00 |
| Merchandise processing fee 0.3464% of value | $207.84 |
| Harbor maintenance fee 0.125% of value, ocean only | $75.00 |
| Single entry bond About $5.50 per $1,000, $55 minimum | $330.00 |
| Landed cost | $79,862.62 |
Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.
General duty rates under 8482 run from 2.4% to 9.9%, and the calculator starts at 5.8%, the most common. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.
All 56 HTS codes under heading 8482
A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.
| HTS code | Description | General | Special | Column 2 | Units | |
|---|---|---|---|---|---|---|
| 8482.10Ball bearings | ||||||
| 8482.10.10Ball bearings with integral shafts | ||||||
| 8482.10.10.40 | Bearings having an outside diameter not over 30 mm | 2.4% | Free (A+, | 35% | No., kg | Price it |
| 8482.10.10.80 | Other | 2.4% | Free (A+, | 35% | No., kg | Price it |
| 8482.10.50Other | ||||||
| 8482.10.50.04 | Unground bearings | 9% | Free (A+, | 67% | No. | Price it |
| Other | ||||||
| 8482.10.50.08 | Thrust bearings | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.12 | Linear bearings | 9% | Free (A+, | 67% | No., kg | Price it |
| Angular contact bearings | ||||||
| Wheel hub bearings units | ||||||
| 8482.10.50.16 | Flanged | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.24 | Other | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.28 | Other | 9% | Free (A+, | 67% | No., kg | Price it |
| Radial bearings | ||||||
| Single row bearings | ||||||
| 8482.10.50.32 | Maximum or full capacity type | 9% | Free (A+, | 67% | No., kg | Price it |
| Other bearings, having an outside diameter of | ||||||
| 8482.10.50.36 | Under 9 mm | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.44 | 9 mm and over but not over 30 mm | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.48 | Over 30 mm but not over 52 mm | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.52 | Over 52 mm but not over 100 mm. | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.56 | Over 100 mm | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.60 | Double row ball bearings | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.64 | Other | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.10.50.68 | Other | 9% | Free (A+, | 67% | No., kg | Price it |
| 8482.20.00Tapered roller bearings, including cone and tapered roller assemblies | ||||||
| Cup and cone assemblies entered as a set | ||||||
| Wheel hub units | ||||||
| 8482.20.00.20 | Flanged | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.20.00.30 | Other | 5.8% | Free (A+, | 67% | No., kg | Price it |
| Other | ||||||
| 8482.20.00.40 | With cups having an outside diameter not exceeding 102 mm | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.20.00.61 | With cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.20.00.64 | With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.20.00.67 | Other | 5.8% | Free (A+, | 67% | No., kg | Price it |
| Cone assemblies entered separately | ||||||
| 8482.20.00.70 | For cups having an outside diameter not exceeding 102 mm | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.20.00.81 | For cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.20.00.90 | Other | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.30.00Spherical roller bearings | ||||||
| 8482.30.00.40 | Single row | 5.8% | Free (A*, | 67% | No., kg | Price it |
| 8482.30.00.80 | Other | 5.8% | Free (A*, | 67% | No., kg | Price it |
| 8482.40.00.00 | Needle roller bearings, including cage and needle roller assemblies | 5.8% | Free (A, | 67% | No., kg | Price it |
| 8482.50.00.00 | Other cylindrical roller bearings, including cage and roller assemblies | 5.8% | Free (A, | 67% | No., kg | Price it |
| 8482.80.00Other, including combined ball/roller bearings | ||||||
| 8482.80.00.20 | Combined ball and spherical roller bearings | 5.8% | Free (A, | 67% | No., kg | Price it |
| 8482.80.00.40 | Combined ball and needle roller bearings | 5.8% | Free (A, | 67% | No., kg | Price it |
| 8482.80.00.60 | Combined ball and other cylindrical roller bearings | 5.8% | Free (A, | 67% | No., kg | Price it |
| 8482.80.00.80 | Other | 5.8% | Free (A, | 67% | No., kg | Price it |
| Parts | ||||||
| 8482.91.00Balls, needles and rollers | ||||||
| Balls | ||||||
| 8482.91.00.10 | Of alloy steel | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.91.00.15 | Of copper or copper alloys as described in statistical note 8 to this chapter | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.91.00.30 | Other | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.91.00.40 | Needles | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.91.00.50 | Tapered rollers | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.91.00.70 | Spherical rollers | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.91.00.80 | Other cylindrical rollers | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.91.00.90 | Other | 4.4% | Free (A+, | 45% | kg | Price it |
| 8482.99Other | ||||||
| Inner or outer rings or races | ||||||
| 8482.99.05.00 | For ball bearings | 9.9% | Free (A+, | 67% | No., kg | Price it |
| 8482.99.15For tapered roller bearings | ||||||
| Cups | ||||||
| 8482.99.15.50 | Having an outside diameter not exceeding 203 mm | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.99.15.70 | Other | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.99.15.80 | Other | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.99.25Other | ||||||
| 8482.99.25.20 | For spherical roller bearings | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.99.25.40 | For needle bearings | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.99.25.60 | For other cylindrical roller bearings | 5.8% | Free (A+, | 67% | No., kg | Price it |
| 8482.99.25.80 | Other | 5.8% | Free (A+, | 67% | No., kg | Price it |
| Other | ||||||
| 8482.99.35.00 | Parts of ball bearings (including parts of ball bearings with integral shafts) | 9.9% | Free (A+, | 67% | kg | Price it |
| 8482.99.45.00 | Parts of tapered roller bearings | 5.8% | Free (A+, | 67% | kg | Price it |
| 8482.99.65Other | ||||||
| 8482.99.65.10 | For spherical roller bearings | 5.8% | Free (A+, | 67% | kg | Price it |
| 8482.99.65.30 | For needle bearings | 5.8% | Free (A+, | 67% | kg | Price it |
| 8482.99.65.60 | For other cylindrical roller bearings | 5.8% | Free (A+, | 67% | kg | Price it |
| 8482.99.65.95 | Other | 5.8% | Free (A+, | 67% | kg | Price it |
HS subheadings under 8482
Heading 8482 splits into 8 six digit subheadings, the international level of the code; the United States adds four digits to each.
| HS subheading | Description | HTS codes | General duty |
|---|---|---|---|
| 8482.10 | Ball bearings | 17 | 2.4% to 9% |
| 8482.20 | Tapered roller bearings, including cone and tapered roller assemblies | 9 | 5.8% |
| 8482.30 | Spherical roller bearings | 2 | 5.8% |
| 8482.40 | Needle roller bearings, including cage and needle roller assemblies | 1 | 5.8% |
| 8482.50 | Other cylindrical roller bearings, including cage and roller assemblies | 1 | 5.8% |
| 8482.80 | Other, including combined ball/roller bearings | 4 | 5.8% |
| 8482.91 | Parts: Balls, needles and rollers | 8 | 4.4% |
| 8482.99 | Other | 14 | 5.8% to 9.9% |
Duty rates under heading 8482 at a glance
56 codes carry a percent of value. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs from 35% to 67%. The entry reports quantity in kg (55 codes), No. (42 codes).
| General duty rate | HTS codes |
|---|---|
| 5.8% | 29 |
| 9% | 15 |
| 4.4% | 8 |
| 2.4% | 2 |
| 9.9% | 2 |
Trade programs in the special column
Lower rates under US trade programs, each named by its General Note 3 symbol, for goods that qualify under the program’s rules of origin and claim it on the entry. Under heading 8482:
| Program | Symbol | Codes naming it | At Free |
|---|---|---|---|
| African Growth and Opportunity Act | D | 56 | 56 |
| Automotive Products Trade Act | B | 56 | 56 |
| Caribbean Basin Economic Recovery Act | E | 56 | 56 |
| Dominican Republic-Central America-United States Free Trade Agreement Implementation Act | P | 56 | 56 |
| Generalized System of Preferences | A+, A*, A | 56 | 56 |
| United States-Australia Free Trade Agreement | AU | 56 | 56 |
| United States-Bahrain Free Trade Agreement Implementation Act | BH | 56 | 56 |
| United States-Chile Free Trade Agreement | CL | 56 | 56 |
| United States-Colombia Trade Promotion Agreement Implementation Act | CO | 56 | 56 |
| United States-Israel Free Trade Area | IL | 56 | 56 |
| United States-Jordan Free Trade Area Implementation Act | JO | 56 | 56 |
| United States-Korea Free Trade Agreement Implementation Act | KR | 56 | 56 |
| United States-Mexico-Canada Agreement | S | 56 | 56 |
| United States-Morocco Free Trade Agreement Implementation Act | MA | 56 | 56 |
| United States-Oman Free Trade Agreement Implementation Act | OM | 56 | 56 |
| United States-Panama Trade Promotion Agreement Implementation Act | PA | 56 | 56 |
| United States-Peru Trade Promotion Agreement Implementation Act | PE | 56 | 56 |
| United States-Singapore Free Trade Agreement | SG | 56 | 56 |
Other headings in chapter 84
The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 84, nuclear reactors, boilers, machinery and mechanical appliances, holds 86 headings: see all of chapter 84.
- 8479: Machines and mechanical appliances having individual functions (41 codes, Free to 2.8%)
- 8480: Molding boxes for metal foundry (19 codes, Free to 3.8%)
- 8481: Taps, cocks, valves and similar appliances, for pipes (61 codes, Free to 5.6%)
- 8483: Transmission shafts and cranks (47 codes, Free to 5.7%)
- 8484: Gaskets and similar joints of metal sheeting combined with other (3 codes, 2.5% to 3.9%)
- 8485: Machines for additive manufacturing (6 codes, Free to 3.1%)
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.