HS code 8483: Transmission shafts and cranks
Heading 8483 of the Harmonized Tariff Schedule of the United States reads: “Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof.”
It holds 47 ten digit US HTS codes under 7 international HS subheadings. General duty rates run from Free to 5.7%; the most common is 4.5%, on 16 codes. 19 US trade programs list a Free special rate on at least one code.
What a container of 8483 costs at your door
- Ports with a captured rate
- China
- ShanghaiCNSGH
- Shenzhen (Yantian)CNYTN
- QingdaoCNQIN
- GuangzhouCNGGZ
- XiamenCNXMN
- TianjinCNTSN
- South Korea
- BusanKRPUS
- Taiwan
- KaohsiungTWKHH
- Vietnam
- Ho Chi Minh CityVNSGN
- India
- Mumbai (Nhava Sheva)INBOM
- ChennaiINMAA
- Taiwan
- TaipeiTWTPE
- South Korea
- Seoul (Incheon)KRINC
- US ports from Shenzhen (Yantian)
- Los AngelesUSLAX
- New YorkUSEWR
- SavannahUSSAV
- HoustonUSHOU
- SeattleUSSEA
- OaklandUSOAK
- CharlestonUSCHS
- MiamiUSMIA
- BaltimoreUSBAL
- JacksonvilleUSJAX
4.5%, the general rate on 16 of the 47 codes under 8483.
| Goods Your invoice value | $60,000.00 |
| Ocean freight to a door near the port Captured October 27, 18 days, entry and ISF filing fees included | $8,269.78 |
| Duty at 4.5% Your HTS rate on the goods value | $2,700.00 |
| Section 301, China 12.5% since July 24, 2026 | $7,500.00 |
| Merchandise processing fee 0.3464% of value | $207.84 |
| Harbor maintenance fee 0.125% of value, ocean only | $75.00 |
| Single entry bond About $5.50 per $1,000, $55 minimum | $330.00 |
| Landed cost | $79,082.62 |
Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.
General duty rates under 8483 run from Free to 5.7%, and the calculator starts at 4.5%, the most common; 1 code carries a rate set per unit. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.
All 47 HTS codes under heading 8483
A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.
| HTS code | Description | General | Special | Column 2 | Units | |
|---|---|---|---|---|---|---|
| 8483.10Transmission shafts (including camshafts and crankshafts) and cranks | ||||||
| Camshafts and crankshafts | ||||||
| 8483.10.10Designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines | ||||||
| For vehicles of chapter 87 | ||||||
| 8483.10.10.10 | For motorcycles | 2.5% | Free (A, | 35% | No., kg | Price it |
| 8483.10.10.30 | Other | 2.5% | Free (A, | 35% | No., kg | Price it |
| 8483.10.10.50 | Other | 2.5% | Free (A, | 35% | No., kg | Price it |
| 8483.10.30Other | ||||||
| 8483.10.30.10 | For vehicles of chapter 87 | 2.5% | Free (A, | 35% | No., kg | Price it |
| 8483.10.30.50 | Other | 2.5% | Free (A, | 35% | No., kg | Price it |
| 8483.10.50.00 | Other transmission shafts and cranks | Free | None listed | 30% | kg | Price it |
| 8483.20Housed bearings, incorporating ball or roller bearings | ||||||
| 8483.20.40Flange, take-up, cartridge and hanger units | ||||||
| 8483.20.40.40 | Incorporating ball bearings | 4.5% | Free (A, | 45% | No. | Price it |
| 8483.20.40.80 | Incorporating roller bearings | 4.5% | Free (A, | 45% | No. | Price it |
| 8483.20.80Other | ||||||
| 8483.20.80.40 | Incorporating ball bearings | 4.5% | Free (A+, | 45% | No. | Price it |
| 8483.20.80.80 | Incorporating roller bearings | 4.5% | Free (A+, | 45% | No. | Price it |
| 8483.30Bearing housings; plain shaft bearings | ||||||
| 8483.30.40Flange, take-up, cartridge and hanger units | ||||||
| 8483.30.40.40 | Ball or roller bearing type | 4.5% | Free (A, | 45% | kg | Price it |
| 8483.30.40.80 | Other | 4.5% | Free (A, | 45% | kg | Price it |
| 8483.30.80Other | ||||||
| Bearing housings | ||||||
| 8483.30.80.20 | Ball or roller bearing type | 4.5% | Free (A+, | 45% | kg | Price it |
| 8483.30.80.40 | Other | 4.5% | Free (A+, | 45% | kg | Price it |
| Plain shaft bearings | ||||||
| With housing | ||||||
| 8483.30.80.55 | Rod end bearings | 4.5% | Free (A+, | 45% | No., kg | Price it |
| 8483.30.80.65 | Other | 4.5% | Free (A+, | 45% | No., kg | Price it |
| Without housing | ||||||
| Spherical | ||||||
| 8483.30.80.71 | Of copper or copper alloys | 4.5% | Free (A+, | 45% | No., kg | Price it |
| 8483.30.80.79 | Other | 4.5% | Free (A+, | 45% | No., kg | Price it |
| Other | ||||||
| 8483.30.80.81 | Of copper or copper alloys | 4.5% | Free (A+, | 45% | No., kg | Price it |
| 8483.30.80.89 | Other | 4.5% | Free (A+, | 45% | No., kg | Price it |
| 8483.40Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters | ||||||
| 8483.40.10.00 | Torque converters | Free | None listed | 27.5% | No. | Price it |
| Gear boxes and other speed changers | ||||||
| Fixed ratio speed changers, multiple and variable ratio speed changers each ratio of which is selected by manual manipulation | ||||||
| 8483.40.30Imported for use with machines for making cellulosic pulp, paper or paperboard | ||||||
| 8483.40.30.40 | Fixed ratio speed changers | Free | None listed | 27.5% | No. | Price it |
| 8483.40.30.80 | Other | Free | None listed | 27.5% | No. | Price it |
| 8483.40.50Other | ||||||
| 8483.40.50.10 | Fixed ratio speed changers | 2.5% | Free (A*, | 27.5% | No. | Price it |
| 8483.40.50.20 | Gear boxes and speed changers for wind turbines, as described in statistical note 9 to this chapter | 2.5% | Free (A*, | 27.5% | No. | Price it |
| 8483.40.50.80 | Other | 2.5% | Free (A*, | 27.5% | No. | Price it |
| 8483.40.70.00 | Other speed changers | 25¢ each + 3.9% | Free (A*, | $4.50 each + 65% | No. | Price it |
| 8483.40.80.00 | Ball or roller screws | 3.8% | Free (A*, | 45% | No. | Price it |
| 8483.40.90.00 | Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately | 2.5% | Free (A*, | 27.5% | No. | Price it |
| 8483.50Flywheels and pulleys, including pulley blocks | ||||||
| 8483.50.40.00 | Gray-iron awning or tackle pulleys, not over 6.4 cm in wheel diameter | 5.7% | Free (A*, | 45% | No. | Price it |
| Other | ||||||
| 8483.50.60.00 | Flywheels | 2.8% | Free (A*, | 45% | No. | Price it |
| 8483.50.90Other | ||||||
| 8483.50.90.40 | Grooved pulleys | 2.8% | Free (A*, | 45% | No. | Price it |
| 8483.50.90.80 | Other | 2.8% | Free (A*, | 45% | kg | Price it |
| 8483.60Clutches and shaft couplings (including universal joints) | ||||||
| 8483.60.40Clutches and universal joints | ||||||
| 8483.60.40.40 | Clutches | 2.8% | Free (A, | 45% | No. | Price it |
| 8483.60.40.80 | Universal joints | 2.8% | Free (A, | 45% | No. | Price it |
| 8483.60.80.00 | Other | 2.8% | Free (A+, | 45% | No. | Price it |
| 8483.90Toothed wheels, chain sprockets and other transmission elements presented separately; parts | ||||||
| 8483.90.10Chain sprockets and parts thereof | ||||||
| 8483.90.10.10 | Forged | 2.8% | Free (A*, | 45% | kg | Price it |
| 8483.90.10.50 | Other | 2.8% | Free (A*, | 45% | kg | Price it |
| Parts of bearing housings and plain shaft bearings | ||||||
| 8483.90.20.00 | Parts of flange, take-up, cartridge and hanger units | 4.5% | Free (A*, | 45% | kg | Price it |
| 8483.90.30.00 | Other | 4.5% | Free (A+, | 45% | kg | Price it |
| 8483.90.50Parts of gearing, gear boxes and other speed changers | ||||||
| 8483.90.50.10 | Forged gear blanks | 2.5% | Free (A*, | 27.5% | No. | Price it |
| 8483.90.50.20 | Parts of gear boxes and speed changers for wind turbines | 2.5% | Free (A*, | 27.5% | kg | Price it |
| 8483.90.50.80 | Other | 2.5% | Free (A*, | 27.5% | kg | Price it |
| Other | ||||||
| 8483.90.70.00 | Parts of articles of subheading 8483.20 | 5.5% | Free (A+, | 45% | kg | Price it |
| 8483.90.80Other | ||||||
| 8483.90.80.10 | Parts of articles of subheading 8483.60.80 | 2.8% | Free (A+, | 45% | kg | Price it |
| 8483.90.80.40 | Parts of universal joints | 2.8% | Free (A+, | 45% | kg | Price it |
| 8483.90.80.80 | Other | 2.8% | Free (A+, | 45% | kg | Price it |
HS subheadings under 8483
Heading 8483 splits into 7 six digit subheadings, the international level of the code; the United States adds four digits to each.
| HS subheading | Description | HTS codes | General duty |
|---|---|---|---|
| 8483.10 | Transmission shafts (including camshafts and crankshafts) and cranks | 6 | Free to 2.5% |
| 8483.20 | Housed bearings, incorporating ball or roller bearings | 4 | 4.5% |
| 8483.30 | Bearing housings; plain shaft bearings | 10 | 4.5% |
| 8483.40 | Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately; ball or roller screws; gear boxes and other speed changers, including torque converters | 9 | Free to 3.8% |
| 8483.50 | Flywheels and pulleys, including pulley blocks | 4 | 2.8% to 5.7% |
| 8483.60 | Clutches and shaft couplings (including universal joints) | 3 | 2.8% |
| 8483.90 | Toothed wheels, chain sprockets and other transmission elements presented separately; parts | 11 | 2.5% to 5.5% |
Duty rates under heading 8483 at a glance
4 codes enter free of general duty; 42 codes carry a percent of value; 1 code carry a compound rate, an amount per unit plus a percent. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs from 27.5% to 45%. The entry reports quantity in No. (31 codes), kg (27 codes).
| General duty rate | HTS codes |
|---|---|
| 4.5% | 16 |
| 2.5% | 12 |
| 2.8% | 11 |
| Free | 4 |
| 3.8% | 1 |
| 5.5% | 1 |
| 5.7% | 1 |
| 25¢ each + 3.9% | 1 |
Trade programs in the special column
Lower rates under US trade programs, each named by its General Note 3 symbol, for goods that qualify under the program’s rules of origin and claim it on the entry. Under heading 8483:
| Program | Symbol | Codes naming it | At Free |
|---|---|---|---|
| African Growth and Opportunity Act | D | 43 | 43 |
| Caribbean Basin Economic Recovery Act | E | 43 | 43 |
| Dominican Republic-Central America-United States Free Trade Agreement Implementation Act | P | 43 | 43 |
| Generalized System of Preferences | A, A+, A* | 43 | 43 |
| United States-Australia Free Trade Agreement | AU | 43 | 43 |
| United States-Bahrain Free Trade Agreement Implementation Act | BH | 43 | 43 |
| United States-Chile Free Trade Agreement | CL | 43 | 43 |
| United States-Colombia Trade Promotion Agreement Implementation Act | CO | 43 | 43 |
| United States-Israel Free Trade Area | IL | 43 | 43 |
| United States-Jordan Free Trade Area Implementation Act | JO | 43 | 43 |
| United States-Korea Free Trade Agreement Implementation Act | KR | 43 | 43 |
| United States-Mexico-Canada Agreement | S | 43 | 43 |
| United States-Morocco Free Trade Agreement Implementation Act | MA | 43 | 43 |
| United States-Oman Free Trade Agreement Implementation Act | OM | 43 | 43 |
| United States-Panama Trade Promotion Agreement Implementation Act | PA | 43 | 43 |
| United States-Peru Trade Promotion Agreement Implementation Act | PE | 43 | 43 |
| United States-Singapore Free Trade Agreement | SG | 43 | 43 |
| Agreement on Trade in Civil Aircraft | C | 38 | 38 |
| Automotive Products Trade Act | B | 21 | 21 |
Other headings in chapter 84
The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 84, nuclear reactors, boilers, machinery and mechanical appliances, holds 86 headings: see all of chapter 84.
- 8480: Molding boxes for metal foundry (19 codes, Free to 3.8%)
- 8481: Taps, cocks, valves and similar appliances, for pipes (61 codes, Free to 5.6%)
- 8482: Ball or roller bearings, and parts thereof (56 codes, 2.4% to 9.9%)
- 8484: Gaskets and similar joints of metal sheeting combined with other (3 codes, 2.5% to 3.9%)
- 8485: Machines for additive manufacturing (6 codes, Free to 3.1%)
- 8486: Machines and apparatus (7 codes, Free)
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.