Section XV: Base metals and articles of base metal

HS code chapter 73: Articles of iron or steel

Chapter 73 of the Harmonized Tariff Schedule of the United States: Articles of iron or steel. It holds 26 headings, 7301 to 7326, and 573 ten digit US HTS codes.

General duty rates in the chapter run from Free to 12.5%, and 446 codes (78%) enter free of general duty. The highest percent rates sit under 7318 (12.5%), 7326 (8.6%), 7323 (8.2%).

26Headings
573US HTS codes
Free to 12.5%General duty
78%Codes free

The 26 headings in chapter 73

Each four digit heading with its HTS codes and the span of their general duty rates. 2 headings hold a single code, shown in full below.

HeadingDescriptionHTS codesGeneral duty
7301Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel3Free
7302Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails15Free
7303Tubes, pipes and hollow profiles, of cast iron3Free
7304Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel139Free
7305Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel21Free
7306Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel68Free
7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel39Free to 6.2%
7308Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel15Free
7309Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment2Free
7310Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment10Free
7311Containers for compressed or liquefied gas, of iron or steel3Free
7312Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated23Free
7313Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel1Free
7314Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel25Free
7315Chain and parts thereof, of iron or steel20Free to 3.9%
7316Anchors, grapnels and parts thereof, of iron or steel1Free
7317Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper23Free
7318Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel48Free to 12.5%
7319Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included7Free to 4.5%
7320Springs and leaves for springs, of iron or steel14Free to 3.9%
7321Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel24Free to 5.7%
7322Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel5Free
7323Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel25Free to 8.2%
7324Sanitary ware and parts thereof, of iron or steel6Free to 3.4%
7325Other cast articles of iron or steel9Free to 2.9%
7326Other articles of iron or steel24Free to 8.6%

2 headings with a single HTS code

These headings have one ten digit code each, so the code and its rates are here in full.

7313: Barbed wire of iron or steel

“Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel.”

HTS code
7313.00.00.00
General
Free
Column 2
Free
Units
kg
Special
None listed
Price it

7316: Anchors, grapnels and parts thereof, of iron or steel

“Anchors, grapnels and parts thereof, of iron or steel.”

HTS code
7316.00.00.00
General
Free
Column 2
25%
Units
No., kg
Special
None listed
Price it

The most common general duty rates in chapter 73

General duty rateHTS codes
Free446
2.9%21
6.2%14
3.9%11
3.2%8
8.5%8
2.7%6
4.3%6

Chapter 73 notes

The legal notes at the head of the chapter decide what it covers and what it leaves to other chapters, so read them before you settle on a heading. They are the schedule’s own text, 207 words.

Read the chapter 73 notes

Notes

1. In this chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1(d) to chapter 72.

2. In this chapter the word "wire" means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Additional U.S. Notes

1. For the purposes of heading 7304 or 7306, the rate of duty "Free (C)" appearing in the "Special" subcolumn applies only to tubes and pipes with attached fittings, suitable for conducting gases or liquids.

2. For the purposes of subheading 7307.19.30, the expression "ductile fittings" refers to fittings which contain over 2.5 percent carbon and over 0.02 percent of magnesium or of magnesium and cerium, by weight.

Statistical Note

1. For the purposes of statistical reporting numbers 7310.10.0005, 7310.29.0020 and 7310.29.0055, ?refillable stainless steel kegs, whether or not pressurized? refers to cylindrical kegs for liquid beverages, each keg with a domed top and bottom and a single neck piece, designed for a coupler (valve) system and an extractor tube (spear) by which the keg can be cleaned, filled and dispense the liquid contents.

Section XV: the 11 chapters

  • Chapter 72: Iron and steel
  • Chapter 73: Articles of iron or steel (this chapter)
  • Chapter 74: Copper and articles thereof
  • Chapter 75: Nickel and articles thereof
  • Chapter 76: Aluminum and articles thereof
  • Chapter 78: Lead and articles thereof
  • Chapter 79: Zinc and articles thereof
  • Chapter 80: Tin and articles thereof
  • Chapter 81: Other base metals; cermets; articles thereof
  • Chapter 82: Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
  • Chapter 83: Miscellaneous articles of base metal

Before you file

The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.

Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026. Chapter notes read November 16, 2026.