Section XV, chapter 73

HS code 7306: Other tubes, pipes and hollow profiles, of iron or steel

Heading 7306 of the Harmonized Tariff Schedule of the United States reads: “Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel.”

It holds 68 ten digit US HTS codes under 10 international HS subheadings. Every code with a free or percent rate enters at a general duty rate of Free. No trade program lists a Free special rate here.

68 codesUS HTS codes
FreeGeneral duty
1% to 45%Column 2 duty
0Programs at Free

What a container of 7306 costs at your door

From
To US port
Load

Free, the general rate on every code under 7306.

Landed at your door, per unit
$38.19
$3.75 of it is duty, $4.13 is freight.
Price this lane live
Goods
Your invoice value
$60,000.00
Ocean freight to a door near the port
Captured October 27, 18 days, entry and ISF filing fees included
$8,269.78
Duty at 0%
Your HTS rate on the goods value
$0.00
Section 301, China
12.5% since July 24, 2026
$7,500.00
Merchandise processing fee
0.3464% of value
$207.84
Harbor maintenance fee
0.125% of value, ocean only
$75.00
Single entry bond
About $5.50 per $1,000, $55 minimum
$330.00
Landed cost$76,382.62

Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.

Every 7306 code enters at a general duty rate of Free, so the calculator starts at 0%. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.

All 68 HTS codes under heading 7306

A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.

HTS codeDescriptionGeneralSpecialColumn 2Units
Line pipe of a kind used for oil or gas pipelines
7306.11.00Welded, of stainless steel
7306.11.00.10With an outside diameter not exceeding 114.3 mmFreeNone listed10%kgPrice it
7306.11.00.50With an outside diameter exceeding 114.3 mmFreeNone listed10%kgPrice it
7306.19Other
7306.19.10Of iron or nonalloy steel
7306.19.10.10With an outside diameter not exceeding 114.3 mmFreeNone listed5.5%kgPrice it
7306.19.10.50With an outside diameter exceeding 114.3 mmFreeNone listed5.5%kgPrice it
7306.19.51Of alloy steel
7306.19.51.10With an outside diameter not exceeding 114.3 mmFreeNone listed10%kgPrice it
7306.19.51.50With an outside diameter exceeding 114.3 mmFreeNone listed10%kgPrice it
Casing and tubing of a kind used in drilling for oil or gas
7306.21Welded of stainless steel
Casing
7306.21.30.00Threaded or coupledFreeNone listed28%kgPrice it
7306.21.40.00OtherFreeNone listed8.5%kgPrice it
7306.21.80Tubing
7306.21.80.10Imported with couplingFreeNone listed10%kgPrice it
7306.21.80.50OtherFreeNone listed10%kgPrice it
7306.29Other
Casing
Of iron or nonalloy steel
7306.29.10Threaded or coupled
7306.29.10.30Imported with couplingFreeNone listed20%kgPrice it
7306.29.10.90OtherFreeNone listed20%kgPrice it
7306.29.20.00OtherFreeNone listed1%kgPrice it
Other
7306.29.31.00Threaded or coupledFreeNone listed28%kgPrice it
7306.29.41.00OtherFreeNone listed8.5%kgPrice it
Tubing
7306.29.60Of iron or nonalloy steel
7306.29.60.10Imported with couplingFreeNone listed5.5%kgPrice it
7306.29.60.50OtherFreeNone listed5.5%kgPrice it
7306.29.81Other
7306.29.81.10Imported with couplingFreeNone listed10%kgPrice it
7306.29.81.50OtherFreeNone listed10%kgPrice it
7306.30Other, welded, of circular cross section, of iron or nonalloy steel
7306.30.10Having a wall thickness of less than 1.65 mm
7306.30.10.10Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduitFreeNone listed25%kgPrice it
7306.30.10.90OtherFreeNone listed25%kgPrice it
Having a wall thickness of 1.65 mm or more
7306.30.30.00Tapered steel pipes and tubes principally used as parts of illuminating articlesFreeNone listed45%kgPrice it
7306.30.50Other
7306.30.50.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawnFreeNone listed5.5%kgPrice it
7306.30.50.15Other, cold-drawnFreeNone listed5.5%kgPrice it
7306.30.50.20Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mmFreeNone listed5.5%kgPrice it
Other
With an outside diameter not exceeding 114.3 mm
Galvanized
Imported with coupling
7306.30.50.26With an outside diameter not exceeding 50.8 mmFreeNone listed5.5%kgPrice it
7306.30.50.27With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFreeNone listed5.5%kgPrice it
7306.30.50.28Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduitFreeNone listed5.5%kgPrice it
Other
7306.30.50.31With an outside diameter not exceeding 50.8 mmFreeNone listed5.5%kgPrice it
7306.30.50.33With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFreeNone listed5.5%kgPrice it
Other
7306.30.50.35Tube and pipe hollows for redrawingFreeNone listed5.5%kgPrice it
Imported with coupling
7306.30.50.41With an outside diameter not exceeding 50.8 mmFreeNone listed5.5%kgPrice it
7306.30.50.43With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFreeNone listed5.5%kgPrice it
Other
7306.30.50.56With an outside diameter not exceeding 50.8 mmFreeNone listed5.5%kgPrice it
7306.30.50.57With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmFreeNone listed5.5%kgPrice it
With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
7306.30.50.85GalvanizedFreeNone listed5.5%kgPrice it
7306.30.50.90OtherFreeNone listed5.5%kgPrice it
7306.40Other, welded, of circular cross section, of stainless steel
7306.40.10Having a wall thickness of less than 1.65 mm
Containing more than 0.5 percent by weight of nickel
7306.40.10.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFreeNone listed36%kgPrice it
7306.40.10.15OtherFreeNone listed36%kgPrice it
7306.40.10.90OtherFreeNone listed36%kgPrice it
7306.40.50Having a wall thickness of 1.65 mm or more
7306.40.50.05Of high-nickel alloy steelFreeNone listed11%kgPrice it
Other
7306.40.50.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawnFreeNone listed11%kgPrice it
Other, cold-drawn or cold-rolled (cold- reduced)
7306.40.50.40Containing more than 0.5 percent but less than 24 percent by weight of nickelFreeNone listed11%kgPrice it
Other
7306.40.50.42Containing less than 15 percent by weight of chromiumFreeNone listed11%kgPrice it
7306.40.50.44OtherFreeNone listed11%kgPrice it
Other
With an outside diameter not exceeding 114.3 mm
Containing more than 0.5 percent but less than 24 percent by weight of nickel
7306.40.50.62Containing more than 1.5 percent but less than 5 percent by weight of molybdenumFreeNone listed11%kgPrice it
7306.40.50.64OtherFreeNone listed11%kgPrice it
7306.40.50.80OtherFreeNone listed11%kgPrice it
With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm
7306.40.50.85Containing more than 0.5 percent but less than 24 percent by weight of nickelFreeNone listed11%kgPrice it
7306.40.50.90OtherFreeNone listed11%kgPrice it
7306.50Other, welded, of circular cross section, of other alloy steel
7306.50.10.00Having a wall thickness of less than 1.65 mmFreeNone listed35%kgPrice it
Having a wall thickness of 1.65 mm or more
7306.50.30.00Tapered pipes and tubes of steel principally used as parts of illuminating articlesFreeNone listed45%kgPrice it
7306.50.50Other
7306.50.50.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawnFreeNone listed10%kgPrice it
7306.50.50.30Other, cold-drawn or cold-rolled (cold- reduced)FreeNone listed10%kgPrice it
Other
7306.50.50.50With an outside diameter not exceeding 114.3 mmFreeNone listed10%kgPrice it
7306.50.50.70With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFreeNone listed10%kgPrice it
Other, welded, of noncircular cross section
7306.61Of square or rectangular cross section
Having a wall thickness of 4 mm or more
7306.61.10.00Of iron or nonalloy steelFreeNone listed1%kgPrice it
7306.61.30.00Of alloy steelFreeNone listed28%kgPrice it
Having a wall thickness of less than 4 mm
7306.61.50.00Of iron or nonalloy steelFreeNone listed25%kgPrice it
7306.61.70Of alloy steel
7306.61.70.30Of stainless steelFreeNone listed35%kgPrice it
7306.61.70.60OtherFreeNone listed35%kgPrice it
7306.69Of other noncircular cross section
Having a wall thickness of 4 mm or more
7306.69.10.00Of iron or nonalloy steelFreeNone listed1%kgPrice it
7306.69.30.00Of alloy steelFreeNone listed28%kgPrice it
Having a wall thickness of less than 4 mm
7306.69.50.00Of iron or nonalloy steelFreeNone listed25%kgPrice it
7306.69.70Of alloy steel
7306.69.70.30Of stainless steelFreeNone listed35%kgPrice it
7306.69.70.60OtherFreeNone listed35%kgPrice it
7306.90Other
7306.90.10.00Of iron or nonalloy steelFreeNone listed5.5%kgPrice it
7306.90.50.00Of alloy steelFreeNone listed10%kgPrice it

HS subheadings under 7306

Heading 7306 splits into 10 six digit subheadings, the international level of the code; the United States adds four digits to each.

HS subheadingDescriptionHTS codesGeneral duty
7306.11Line pipe of a kind used for oil or gas pipelines: Welded, of stainless steel2Free
7306.19Other4Free
7306.21Welded of stainless steel4Free
7306.29Other9Free
7306.30Other, welded, of circular cross section, of iron or nonalloy steel18Free
7306.40Other, welded, of circular cross section, of stainless steel13Free
7306.50Other, welded, of circular cross section, of other alloy steel6Free
7306.61Of square or rectangular cross section5Free
7306.69Of other noncircular cross section5Free
7306.90Other2Free

Duty rates under heading 7306 at a glance

68 codes enter free of general duty. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs from 1% to 45%. The entry reports quantity in kg.

Trade programs in the special column

No code under heading 7306 lists a special rate under a trade program: goods pay the general rate, or the column 2 rate where it applies.

Other headings in chapter 73

The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 73, articles of iron or steel, holds 26 headings: see all of chapter 73.

  • 7303: Tubes, pipes and hollow profiles, of cast iron (3 codes, Free)
  • 7304: Tubes, pipes and hollow profiles, seamless, of iron or steel (139 codes, Free)
  • 7305: Other tubes and pipes, having circular cross sections (21 codes, Free)
  • 7307: Tube or pipe fittings, of iron or steel (39 codes, Free to 6.2%)
  • 7308: Structures and parts of structures of iron or steel (15 codes, Free)
  • 7309: Reservoirs, tanks, vats and similar containers for any material (2 codes, Free)

Before you file

The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.

Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.