Section XV, chapter 73

HS code 7304: Tubes, pipes and hollow profiles, seamless, of iron or steel

Heading 7304 of the Harmonized Tariff Schedule of the United States reads: “Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel.”

It holds 139 ten digit US HTS codes under 13 international HS subheadings. Every code with a free or percent rate enters at a general duty rate of Free. No trade program lists a Free special rate here.

139 codesUS HTS codes
FreeGeneral duty
1% to 36%Column 2 duty
0Programs at Free

What a container of 7304 costs at your door

From
To US port
Load

Free, the general rate on every code under 7304.

Landed at your door, per unit
$38.19
$3.75 of it is duty, $4.13 is freight.
Price this lane live
Goods
Your invoice value
$60,000.00
Ocean freight to a door near the port
Captured October 27, 18 days, entry and ISF filing fees included
$8,269.78
Duty at 0%
Your HTS rate on the goods value
$0.00
Section 301, China
12.5% since July 24, 2026
$7,500.00
Merchandise processing fee
0.3464% of value
$207.84
Harbor maintenance fee
0.125% of value, ocean only
$75.00
Single entry bond
About $5.50 per $1,000, $55 minimum
$330.00
Landed cost$76,382.62

Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.

Every 7304 code enters at a general duty rate of Free, so the calculator starts at 0%. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.

All 139 HTS codes under heading 7304

A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.

HTS codeDescriptionGeneralSpecialColumn 2Units
Line pipe of a kind used for oil or gas pipelines
7304.11.00Of stainless steel
7304.11.00.20Having an outside diameter not exceeding 114.3 mmFreeNone listed35%kgPrice it
7304.11.00.50Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.11.00.80Having an outside diameter exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.19Other
7304.19.10Of iron or nonalloy steel
7304.19.10.20Having an outside diameter not exceeding 114.3 mmFreeNone listed25%kgPrice it
7304.19.10.30Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFreeNone listed25%kgPrice it
Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm
7304.19.10.45Having a wall thickness less than 12.7 mmFreeNone listed25%kgPrice it
7304.19.10.60Having a wall thickness of 12.7 mm or moreFreeNone listed25%kgPrice it
7304.19.10.80Having an outside diameter exceeding 406.4 mmFreeNone listed25%kgPrice it
7304.19.50Of other alloy steel
7304.19.50.20Having an outside diameter not exceeding 114.3 mmFreeNone listed35%kgPrice it
7304.19.50.50Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.19.50.80Having an outside diameter exceeding 406.4 mmFreeNone listed35%kgPrice it
Casing, tubing and drill pipe, of a kind used in drilling for oil or gas
7304.22.00Drill pipe of stainless steel
Having an outside diameter not exceeding 168.3 mm
7304.22.00.30Having a wall thickness not exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.22.00.45Having a wall thickness exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.22.00.60Having an outside diameter exceeding 168.3 mmFreeNone listed35%kgPrice it
7304.23Other drill pipe
7304.23.30.00Of iron or nonalloy steelFreeNone listed25%kgPrice it
7304.23.60Of alloy steel
Having an outside diameter not exceeding 168.3 mm
7304.23.60.30Having a wall thickness not exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.23.60.45Having a wall thickness exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.23.60.60Having an outside diameter exceeding 168.3 mmFreeNone listed35%kgPrice it
7304.24Other, of stainless steel
Casing
7304.24.30Threaded or coupled
Having an outside diameter less than 215.9 mm
7304.24.30.10Having a wall thickness less than 12.7 mmFreeNone listed28%kgPrice it
7304.24.30.20Having a wall thickness of 12.7 mm or moreFreeNone listed28%kgPrice it
Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.24.30.30Having a wall thickness less than 12.7 mmFreeNone listed28%kgPrice it
7304.24.30.40Having a wall thickness of 12.7 mm or moreFreeNone listed28%kgPrice it
7304.24.30.45Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmFreeNone listed28%kgPrice it
7304.24.30.80Having an outside diameter exceeding 406.4 mmFreeNone listed28%kgPrice it
7304.24.40Other
Having an outside diameter less than 215.9 mm
7304.24.40.10Having a wall thickness less than 12.7 mmFreeNone listed8.5%kgPrice it
7304.24.40.20Having a wall thickness of 12.7 mm or moreFreeNone listed8.5%kgPrice it
Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.24.40.30Having a wall thickness less than 12.7 mmFreeNone listed8.5%kgPrice it
7304.24.40.40Having a wall thickness of 12.7 mm or moreFreeNone listed8.5%kgPrice it
Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.24.40.50Having a wall thickness less than 12.7 mmFreeNone listed8.5%kgPrice it
7304.24.40.60Having a wall thickness of 12.7 mm or moreFreeNone listed8.5%kgPrice it
7304.24.40.80Having an outside diameter exceeding 406.4 mmFreeNone listed8.5%kgPrice it
7304.24.60Tubing
Having an outside diameter not exceeding 114.3 mm
7304.24.60.15Having a wall thickness not exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.24.60.30Having a wall thickness exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.24.60.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFreeNone listed35%kgPrice it
7304.24.60.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.24.60.75Having an outside diameter exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.29Other
Casing
Of iron or nonalloy steel
7304.29.10Threaded or coupled
Having an outside diameter less than 215.9 mm
7304.29.10.10Having a wall thickness less than 12.7 mmFreeNone listed20%kgPrice it
7304.29.10.20Having a wall thickness of 12.7 mm or moreFreeNone listed20%kgPrice it
Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.10.30Having a wall thickness less than 12.7 mmFreeNone listed20%kgPrice it
7304.29.10.40Having a wall thickness of 12.7 mm or moreFreeNone listed20%kgPrice it
Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.10.50Having a wall thickness less than 12.7 mmFreeNone listed20%kgPrice it
7304.29.10.60Having a wall thickness of 12.7 mm or moreFreeNone listed20%kgPrice it
7304.29.10.80Having an outside diameter exceeding 406.4 mmFreeNone listed20%kgPrice it
7304.29.20Other
Having an outside diameter less than 215.9 mm
7304.29.20.10Having a wall thickness less than 12.7 mmFreeNone listed1%kgPrice it
7304.29.20.20Having a wall thickness of 12.7 mm or moreFreeNone listed1%kgPrice it
Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.20.30Having a wall thickness less than 12.7 mmFreeNone listed1%kgPrice it
7304.29.20.40Having a wall thickness of 12.7 mm or moreFreeNone listed1%kgPrice it
Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.20.50Having a wall thickness less than 12.7 mmFreeNone listed1%kgPrice it
7304.29.20.60Having a wall thickness of 12.7 mm or moreFreeNone listed1%kgPrice it
7304.29.20.80Having an outside diameter exceeding 406.4 mmFreeNone listed1%kgPrice it
Of other alloy steel
7304.29.31Threaded or coupled
Having an outside diameter less than 215.9 mm
7304.29.31.10Having a wall thickness less than 12.7 mmFreeNone listed28%kgPrice it
7304.29.31.20Having a wall thickness of 12.7 mm or moreFreeNone listed28%kgPrice it
Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.31.30Having a wall thickness less than 12.7 mmFreeNone listed28%kgPrice it
7304.29.31.40Having a wall thickness of 12.7 mm or moreFreeNone listed28%kgPrice it
Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.31.50Having a wall thickness less than 12.7 mmFreeNone listed28%kgPrice it
7304.29.31.60Having a wall thickness of 12.7 mm or moreFreeNone listed28%kgPrice it
7304.29.31.80Having an outside diameter exceeding 406.4 mmFreeNone listed28%kgPrice it
7304.29.41Other
Having an outside diameter less than 215.9 mm
7304.29.41.10Having a wall thickness less than 12.7 mmFreeNone listed8.5%kgPrice it
7304.29.41.20Having a wall thickness of 12.7 mm or moreFreeNone listed8.5%kgPrice it
Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm
7304.29.41.30Having a wall thickness less than 12.7 mmFreeNone listed8.5%kgPrice it
7304.29.41.40Having a wall thickness of 12.7 mm or moreFreeNone listed8.5%kgPrice it
Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.29.41.50Having a wall thickness less than 12.7 mmFreeNone listed8.5%kgPrice it
7304.29.41.60Having a wall thickness of 12.7 mm or moreFreeNone listed8.5%kgPrice it
7304.29.41.80Having an outside diameter exceeding 406.4 mmFreeNone listed8.5%kgPrice it
Tubing
7304.29.50Of iron or nonalloy steel
Having an outside diameter not exceeding 114.3 mm
7304.29.50.15Having a wall thickness not exceeding 9.5 mmFreeNone listed25%kgPrice it
7304.29.50.30Having a wall thickness exceeding 9.5 mmFreeNone listed25%kgPrice it
7304.29.50.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFreeNone listed25%kgPrice it
7304.29.50.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFreeNone listed25%kgPrice it
7304.29.50.75Having an outside diameter exceeding 406.4 mmFreeNone listed25%kgPrice it
7304.29.61Of other alloy steel
Having an outside diameter not exceeding 114.3 mm
7304.29.61.15Having a wall thickness not exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.29.61.30Having a wall thickness exceeding 9.5 mmFreeNone listed35%kgPrice it
7304.29.61.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFreeNone listed35%kgPrice it
7304.29.61.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.29.61.75Having an outside diameter exceeding 406.4 mmFreeNone listed35%kgPrice it
Other, of circular cross section, of iron or nonalloy steel
7304.31Cold-drawn or cold-rolled (cold-reduced)
7304.31.30.00Hollow barsFreeNone listed22%kgPrice it
7304.31.60Other
7304.31.60.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFreeNone listed25%kgPrice it
7304.31.60.50OtherFreeNone listed25%kgPrice it
7304.39.00Other
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.39.00.02Having an outside diameter less than 38.1 mmFreeNone listed25%kgPrice it
7304.39.00.04Having an outside diameter of 38.1 mm or more but less than 190.5 mmFreeNone listed25%kgPrice it
7304.39.00.06Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmFreeNone listed25%kgPrice it
7304.39.00.08Having an outside diameter exceeding 285.8 mmFreeNone listed25%kgPrice it
Other
7304.39.00.16Galvanized, having an outside diameter not exceeding 114.3 mmFreeNone listed25%kgPrice it
Other
7304.39.00.20Having an outside diameter less than 38.1 mmFreeNone listed25%kgPrice it
Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
7304.39.00.24Having a wall thickness less than 6.4 mmFreeNone listed25%kgPrice it
7304.39.00.28Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmFreeNone listed25%kgPrice it
7304.39.00.32Having a wall thickness exceeding 12.7 mmFreeNone listed25%kgPrice it
Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
7304.39.00.36Having a wall thickness less than 12.7 mmFreeNone listed25%kgPrice it
7304.39.00.40Having a wall thickness of 12.7 mm or more but less than 19 mmFreeNone listed25%kgPrice it
7304.39.00.44Having a wall thickness of 19 mm or moreFreeNone listed25%kgPrice it
Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
7304.39.00.48Having a wall thickness less than 12.7 mmFreeNone listed25%kgPrice it
7304.39.00.52Having a wall thickness of 12.7 mm or more but less than 19 mmFreeNone listed25%kgPrice it
7304.39.00.56Having a wall thickness of 19 mm or moreFreeNone listed25%kgPrice it
Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.39.00.62Having a wall thickness less than 12.7 mmFreeNone listed25%kgPrice it
7304.39.00.68Having a wall thickness of 12.7 mm or more but less than 19 mmFreeNone listed25%kgPrice it
7304.39.00.72Having a wall thickness of 19 mm or moreFreeNone listed25%kgPrice it
Having an outside diameter exceeding 406.4 mm
7304.39.00.76Having a wall thickness less than 19 mmFreeNone listed25%kgPrice it
7304.39.00.80Having a wall thickness of 19 mm or moreFreeNone listed25%kgPrice it
Other, of circular cross section, of stainless steel
7304.41Cold-drawn or cold-rolled (cold-reduced)
7304.41.30Of an external diameter of less than 19 mm
7304.41.30.05Of high-nickel alloy steelFreeNone listed36%kgPrice it
Other
7304.41.30.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFreeNone listed36%kgPrice it
7304.41.30.45OtherFreeNone listed36%kgPrice it
7304.41.60Other
7304.41.60.05Of high-nickel alloy steelFreeNone listed36%kgPrice it
Other
7304.41.60.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFreeNone listed36%kgPrice it
7304.41.60.45OtherFreeNone listed36%kgPrice it
7304.49.00Other
7304.49.00.05Of high-nickel alloy steelFreeNone listed36%kgPrice it
Other
7304.49.00.15Hollow barsFreeNone listed36%kgPrice it
Other
7304.49.00.45Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFreeNone listed36%kgPrice it
7304.49.00.60OtherFreeNone listed36%kgPrice it
Other, of circular cross section, of other alloy steel
7304.51Cold-drawn or cold-rolled (cold-reduced)
7304.51.10.00Suitable for use in the manufacture of ball or roller bearingsFreeNone listed34%kgPrice it
7304.51.50Other
7304.51.50.05Of high-nickel alloy steelFreeNone listed35%kgPrice it
Other
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.51.50.15Of heat-resisting steelFreeNone listed35%kgPrice it
7304.51.50.45OtherFreeNone listed35%kgPrice it
7304.51.50.60OtherFreeNone listed35%kgPrice it
7304.59Other
7304.59.10.00Suitable for use in the manufacture of ball or roller bearingsFreeNone listed34%kgPrice it
Other
7304.59.20Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
7304.59.20.30Of heat-resisting steelFreeNone listed35%kgPrice it
Other
7304.59.20.40Having an outside diameter less than 38.1 mmFreeNone listed35%kgPrice it
7304.59.20.45Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mmFreeNone listed35%kgPrice it
7304.59.20.55Having an outside diameter exceeding 114.3 mm but less than 190.5 mmFreeNone listed35%kgPrice it
7304.59.20.60Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmFreeNone listed35%kgPrice it
7304.59.20.70Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.59.20.80Having an outside diameter exceeding 406.4 mmFreeNone listed35%kgPrice it
Other
7304.59.60.00Of heat-resisting steelFreeNone listed36%kgPrice it
7304.59.80Other
7304.59.80.10Having an outside diameter less than 38.1 mmFreeNone listed35%kgPrice it
Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
7304.59.80.15Having a wall thickness less than 6.4 mmFreeNone listed35%kgPrice it
7304.59.80.20Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmFreeNone listed35%kgPrice it
7304.59.80.25Having a wall thickness exceeding 12.7 mmFreeNone listed35%kgPrice it
Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
7304.59.80.30Having a wall thickness less than 12.7 mmFreeNone listed35%kgPrice it
7304.59.80.35Having a wall thickness of 12.7 mm or more but less than 19 mmFreeNone listed35%kgPrice it
7304.59.80.40Having a wall thickness of 19 mm or moreFreeNone listed35%kgPrice it
Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
7304.59.80.45Having a wall thickness less than 12.7 mmFreeNone listed35%kgPrice it
7304.59.80.50Having a wall thickness of 12.7 mm or more but less than 19 mmFreeNone listed35%kgPrice it
7304.59.80.55Having a wall thickness of 19 mm or moreFreeNone listed35%kgPrice it
Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
7304.59.80.60Having a wall thickness less than 12.7 mmFreeNone listed35%kgPrice it
7304.59.80.65Having a wall thickness of 12.7 mm or more but less than 19 mmFreeNone listed35%kgPrice it
7304.59.80.70Having a wall thickness of 19 mm or moreFreeNone listed35%kgPrice it
7304.59.80.80Having an outside diameter exceeding 406.4 mmFreeNone listed35%kgPrice it
7304.90Other
Having a wall thickness of 4 mm or more
7304.90.10.00Of iron or nonalloy steelFreeNone listed1%kgPrice it
7304.90.30.00Of alloy steelFreeNone listed8.5%kgPrice it
Having a wall thickness of less than 4 mm
7304.90.50.00Of iron or nonalloy steelFreeNone listed25%kgPrice it
7304.90.70.00Of alloy steelFreeNone listed35%kgPrice it

HS subheadings under 7304

Heading 7304 splits into 13 six digit subheadings, the international level of the code; the United States adds four digits to each.

HS subheadingDescriptionHTS codesGeneral duty
7304.11Line pipe of a kind used for oil or gas pipelines: Of stainless steel3Free
7304.19Other8Free
7304.22Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: Drill pipe of stainless steel3Free
7304.23Other drill pipe4Free
7304.24Other, of stainless steel18Free
7304.29Other38Free
7304.31Cold-drawn or cold-rolled (cold-reduced)3Free
7304.39Other, of circular cross section, of iron or nonalloy steel: Other20Free
7304.41Cold-drawn or cold-rolled (cold-reduced)6Free
7304.49Other, of circular cross section, of stainless steel: Other4Free
7304.51Cold-drawn or cold-rolled (cold-reduced)5Free
7304.59Other23Free
7304.90Other4Free

Duty rates under heading 7304 at a glance

139 codes enter free of general duty. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs from 1% to 36%. The entry reports quantity in kg.

Trade programs in the special column

No code under heading 7304 lists a special rate under a trade program: goods pay the general rate, or the column 2 rate where it applies.

Other headings in chapter 73

The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 73, articles of iron or steel, holds 26 headings: see all of chapter 73.

  • 7301: Sheet piling of iron or steel, whether or not drilled (3 codes, Free)
  • 7302: Railway or tramway track construction material of iron or steel (15 codes, Free)
  • 7303: Tubes, pipes and hollow profiles, of cast iron (3 codes, Free)
  • 7305: Other tubes and pipes, having circular cross sections (21 codes, Free)
  • 7306: Other tubes, pipes and hollow profiles, of iron or steel (68 codes, Free)
  • 7307: Tube or pipe fittings, of iron or steel (39 codes, Free to 6.2%)

Before you file

The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.

Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.