HS code chapter 44: Wood and articles of wood
Chapter 44 of the Harmonized Tariff Schedule of the United States: Wood and articles of wood; wood charcoal. It holds 21 headings, 4401 to 4421, and 556 ten digit US HTS codes.
General duty rates in the chapter run from Free to 10.7%, and 356 codes (64%) enter free of general duty. The highest percent rates sit under 4415 (10.7%), 4421 (10.7%), 4412 (8%).
The 21 headings in chapter 44
Each four digit heading with its HTS codes and the span of their general duty rates. 2 headings hold a single code, shown in full below.
| Heading | Description | HTS codes | General duty |
|---|---|---|---|
| 4401 | Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms; wood in chips or particles; sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms | 13 | Free |
| 4402 | Wood charcoal (including shell or nut charcoal), whether or not agglomerated | 3 | Free |
| 4403 | Wood in the rough, whether or not stripped of bark or sap- wood, or roughly squared | 85 | Free |
| 4404 | Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking-sticks, umbrellas, tool handles or the like; chipwood and the like | 6 | Free |
| 4405 | Wood wool (excelsior); wood flour | 1 | 3.2% |
| 4406 | Railway or tramway sleepers (cross-ties) of wood | 4 | Free |
| 4407 | Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm | 74 | Free |
| 4408 | Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm | 27 | Free |
| 4409 | Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed | 47 | Free to 4.9% |
| 4410 | Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances | 11 | Free |
| 4411 | Fiberboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances | 36 | Free to 6% |
| 4412 | Plywood, veneered panels and similar laminated wood | 123 | Free to 8% |
| 4413 | Densified wood, in blocks, plates, strips or profile shapes | 1 | 3.7% |
| 4414 | Wooden frames for paintings, photographs, mirrors or similar objects | 2 | 3.9% |
| 4415 | Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums, of wood; pallets, box-pallets and other load boards, of wood; pallet collars of wood | 5 | Free to 10.7% |
| 4416 | Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood, including staves | 10 | Free to 3.2% |
| 4417 | Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees, of wood | 5 | Free to 5.1% |
| 4418 | Builders' joinery and carpentry of wood, including cellular wood panels and assembled flooring panels; shingles and shakes | 45 | Free to 8% |
| 4419 | Tableware and kitchenware, of wood | 8 | 3.2% to 5.3% |
| 4420 | Wood marquetry and inlaid wood; caskets and cases for jewelry or cutlery and similar articles, of wood; statuettes and other ornaments, of wood; wooden articles of furniture not falling within chapter 94 | 8 | Free to 4.3% |
| 4421 | Other articles of wood | 42 | Free to 10.7% |
2 headings with a single HTS code
These headings have one ten digit code each, so the code and its rates are here in full.
4405: Wood wool
“Wood wool (excelsior); wood flour.”
- HTS code
- 4405.00.00.00
- General
- 3.2%
- Column 2
- 33 1/3%
- Units
- kg
- Special
- Free (A+,
AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
4413: Densified wood, in blocks, plates, strips or profile shapes
“Densified wood, in blocks, plates, strips or profile shapes.”
- HTS code
- 4413.00.00.00
- General
- 3.7%
- Column 2
- 50%
- Units
- kg
- Special
- Free (A,
AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
The most common general duty rates in chapter 44
| General duty rate | HTS codes |
|---|---|
| Free | 356 |
| 8% | 79 |
| 3.2% | 49 |
| 5.1% | 14 |
| 3.9% | 10 |
| 3.3% | 8 |
| 4.8% | 8 |
| 6.5¢/gross | 8 |
Chapter 44 notes
The legal notes at the head of the chapter decide what it covers and what it leaves to other chapters, so read them before you settle on a heading. They are the schedule’s own text, 995 words.
Read the chapter 44 notes
Notes
1. This chapter does not cover:
(a) Wood, in chips, in shavings, crushed, ground or powdered, of a kind used primarily in perfumery, in pharmacy, or for insecticidal, fungicidal or similar purposes (heading 1211);
(b) Bamboo or other materials of a woody nature of a kind used primarily for plaiting, in the rough, whether or not split, sawn lengthwise or cut to length (heading 1401);
(c) Wood, in chips, in shavings, ground or powdered, of a kind used primarily in dyeing or in tanning (heading 1404);
(d) Activated charcoal (heading 3802);
(e) Articles of heading 4202;
(f) Goods of chapter 46;
(g) Footwear or parts thereof of chapter 64;
(h) Goods of chapter 66 (for example, umbrellas and walking-sticks and parts thereof);
(ij) Goods of heading 6808;
(k) Imitation jewelry of heading 7117;
(l) Goods of section XVI or section XVII (for example, machine parts, cases, covers, cabinets for machines and apparatus and wheelwrights' wares);
(m) Goods of section XVIII (for example, clock cases and musical instruments and parts thereof);
(n) Parts of firearms (heading 9305);
(o) Articles of chapter 94 (for example, furniture, luminaires and lighting fittings, prefabricated buildings);
(p) Articles of chapter 95 (for example, toys, games, sports equipment);
(q) Articles of chapter 96 (for example, smoking pipes and parts thereof, buttons, pencils, and monopods, bipods, tripods and similar articles) excluding bodies and handles, of wood, for articles of heading 9603; or
(r) Articles of chapter 97 (for example, works of art).
2. In this chapter, the expression "densified wood" means wood which has been subjected to chemical or physical treatment (being, in the case of layers bonded together, treatment in excess of that needed to insure a good bond), and which has thereby acquired increased density or hardness together with improved mechanical strength or resistance to chemical or electrical agencies.
3. Headings 4414 to 4421 apply to articles of the respective descriptions of particle board or similar board, fiberboard, laminated wood or densified wood as they apply to such articles of wood.
4. Products of heading 4410, 4411 or 4412 may be worked to form the shapes provided for in respect of the articles of heading 4409, curved, corrugated, perforated, cut or formed to shapes other than square or rectangular or submitted to any other operation provided it does not give them the character of articles of other headings.
5. Heading 4417 does not apply to tools in which the blade, working edge, working surface or other working part is formed by any of the materials specified in note 1 to chapter 82.
6. Subject to note 1 above and except where the context otherwise requires, any reference to "wood" in a heading of this chapter applies also to bamboo and other materials of a woody nature.
Subheading Notes
1. For the purposes of subheading 4401.31, the expression "wood pellets" means by-products such as cutter shavings, sawdust or chips, of the mechanical wood processing industry, furniture-making industry or other wood transformation activities, which have been agglomerated either directly by compression or by the addition of a binder in a proportion not exceeding 3 percent by weight. Such pellets are cylindrical, with a diameter not exceeding 25 mm and a length not exceeding 100 mm.
2. For the purposes of subheading 4401.32, the expression "wood briquettes" means by-products such as cutter shavings, sawdust or chips, of the mechanical wood processing industry, furniture making or other wood transformation activities, which have been agglomerated either directly by compression or by the addition of a binder in a proportion not exceeding 3 percent by weight. Such briquettes are in the form of cubiform, polyhedral or cylindrical units with the minimum cross-sectional dimension greater than 25 mm.
3. For the purposes of subheading 4407.13, "S-P-F" refers to wood sourced from mixed stands of spruce, pine and fir where the proportion of each species varies and is unknown.
4. For the purposes of subheading 4407.14, "Hem-fir" refers to wood sourced from mixed stands of Western hemlock and fir where the proportion of each species varies and is unknown.
Additional U.S. Notes
1. In this chapter:
(a) The term "wood waste" means residual material other than firewood resulting from the processing of wood, including scraps, shavings, sawdust, veneer clippings, chipper rejects and similar small wood residues, as well as larger or coarser solid types of residual wood such as slabs, edgings, cull pieces and veneer log cores;
(b) The term "standard wood moldings" means wood moldings worked to a pattern and having the same profile in cross section throughout their length; and
(c) The term "surface covered," as applied to the articles of headings 4411 and 4412, means that one or more exterior surfaces of a product have been treated with creosote or other wood preservatives, or with fillers, sealers, waxes, oils, stains, varnishes, paints or enamels, or have been overlaid with paper, fabric, plastics, base metal, or other material.
2. The effectiveness of the proviso to section 304(a)(3)(J) of the Tariff Act of 1930 (19 U.S.C. 1304(a)(3)(J)), to the extent permitted by that section and as provided for in schedule XX to the General Agreement on Tariffs and Trade, is suspended, with the result that sawed lumber and sawed timbers however provided for, telephone, trolley, electric light and telegraph poles of wood and bundles of shingles, other than red cedar shingles, shall not be required to be marked to indicate the country of origin.
3. Heading 4409 includes articles having a repeating design worked along any edge or face.
4. Heading 4418 includes--
(a) drilled or notched lumber studs; and
(b) multi-layer assembled flooring panels having a face ply 4 mm or more in thickness.
Statistical Note
1. For the purposes of heading 4407, the term "rough" includes wood that has been edged, resawn, crosscut or trimmed to smaller sizes but it does not include wood that has been dressed or surfaced by planing on one or more edges or faces or has been edge-glued or end-glued.
Section IX: the 3 chapters
- Chapter 44: Wood and articles of wood; wood charcoal (this chapter)
- Chapter 45: Cork and articles of cork
- Chapter 46: Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026. Chapter notes read November 16, 2026.