Section V: Mineral products

HS code chapter 26: Ores, slag and ash

Chapter 26 of the Harmonized Tariff Schedule of the United States: Ores, slag and ash. It holds 21 headings, 2601 to 2621, and 102 ten digit US HTS codes.

General duty rates in the chapter run from Free to 5%, and 72 codes (71%) enter free of general duty. The highest percent rates sit under 2620 (5%).

21Headings
102US HTS codes
Free to 5%General duty
71%Codes free

The 21 headings in chapter 26

Each four digit heading with its HTS codes and the span of their general duty rates. 3 headings hold a single code, shown in full below.

HeadingDescriptionHTS codesGeneral duty
2601Iron ores and concentrates, including roasted iron pyrites7Free
2602Manganese ores and concentrates, including ferruginous manganese ores and concentrates with a manganese content of 20 percent or more, calculated on the dry weight2Free
2603Copper ores and concentrates5Per unit
2604Nickel ores and concentrates2Free
2605Cobalt ores and concentrates1Free
2606Aluminum ores and concentrates3Free
2607Lead ores and concentrates5Per unit
2608Zinc ores and concentrates5Free
2609Tin ores and concentrates1Free
2610Chromium ores and concentrates3Free
2611Tungsten ores and concentrates2Free
2612Uranium or thorium ores and concentrates2Free
2613Molybdenum ores and concentrates2Per unit
2614Titanium ores and concentrates3Free
2615Niobium (columbium), tantalum, vanadium or zirconium ores and concentrates5Free
2616Precious metal ores and concentrates10Per unit
2617Other ores and concentrates3Free
2618Granulated slag (slag sand) from the manufacture of iron or steel1Free
2619Slag, dross (other than granulated slag), scalings and other waste from the manufacture of iron or steel2Free
2620Slag, ash and residues (other than from the manufacture of iron or steel), containing arsenic, metals or their compounds36Free to 5%
2621Other slag and ash, including seaweed ash (kelp); ash and residues from the incineration of municipal waste2Free

3 headings with a single HTS code

These headings have one ten digit code each, so the code and its rates are here in full.

2605: Cobalt ores and concentrates

“Cobalt ores and concentrates.”

HTS code
2605.00.00.00
General
Free
Column 2
Free
Units
kg, Co kg
Special
None listed
Price it

2609: Tin ores and concentrates

“Tin ores and concentrates.”

HTS code
2609.00.00.00
General
Free
Column 2
Free
Units
t, Sn t
Special
None listed
Price it

2618: Granulated slag from the manufacture of iron or steel

“Granulated slag (slag sand) from the manufacture of iron or steel.”

HTS code
2618.00.00.00
General
Free
Column 2
10%
Units
t
Special
None listed
Price it

The most common general duty rates in chapter 26

General duty rateHTS codes
Free72
1.7¢/kg on lead content10
0.7¢/kg on copper content + 0.7¢/kg on lead content5
0.8¢/kg on lead content5
1.1¢/kg on lead content5
5%1
12.8¢/kg on molybdenum content + 1.8%1
17.6¢/kg on tungsten content + 3.8%1

Chapter 26 notes

The legal notes at the head of the chapter decide what it covers and what it leaves to other chapters, so read them before you settle on a heading. They are the schedule’s own text, 681 words.

Read the chapter 26 notes

Notes

1. This chapter does not cover:

(a) Slag or similar industrial waste prepared as macadam (heading 2517);

(b) Natural magnesium carbonate (magnesite), whether or not calcined (heading 2519);

(c) Sludges from the storage tanks of petroleum oils, consisting mainly of such oils (heading 2710);

(d) Basic slag of chapter 31;

(e) Slag wool, rock wool or similar mineral wools (heading 6806);

(f) Waste or scrap of precious metal or of metal clad with precious metal; other waste or scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal (heading 7112 or 8549); or

(g) Copper, nickel or cobalt mattes produced by any process of smelting (section XV).

2. For the purposes of headings 2601 to 2617, the term "ores" means minerals of mineralogical species actually used in the metallurgical industry for the extraction of mercury, of the metals of heading 2844 or of the metals of section XIV or XV, even if they are intended for non-metallurgical purposes. Headings 2601 to 2617 do not, however, include minerals which have been submitted to processes not normal to the metallurgical industry.

3. Heading 2620 applies only to:

(a) Slag, ash and residues of a kind used in industry either for the extraction of metals or as a basis for the manufacture of chemical compounds of metals, excluding ash and residues from the incineration of municipal waste (heading 2621); and

(b) Slag, ash and residues containing arsenic, whether or not containing metals, of a kind used either for the extraction of arsenic or metals or for the manufacture of their chemical compounds.

Subheading Notes

1. For the purposes of subheading 2620.21.00, "leaded gasoline sludges and leaded anti-knock compound sludges" means sludges obtained from storage tanks of leaded gasoline and leaded anti-knock compounds (for example, tetraethyl lead), and consisting essentially of lead, lead compounds and iron oxide.

2. Slag, ash and residues containing arsenic, mercury, thallium or their mixtures, of a kind used for the extraction of arsenic or those metals or for the manufacture of their chemical compounds, are to be classified in subheading 2620.60.

Additional U.S. Notes

1. The specific rates of duty imposed under the headings of this chapter on the metal content of ores and other materials shall apply to the assay quantity of metal contained therein, whether recovered as metals, as alloys or as chemical compounds or used directly in the manufacture of articles, except that with respect to ores or other materials provided for in this chapter which are subject to duty at specific rates on their copper, lead or zinc content, an absolute deduction for losses of 18 kg per dry metric ton from the respective quantities of each of such metal contents shall be allowed.

2. When the classification of imported materials under any provision of this chapter is dependent on the percentage of metal content, such percentage shall be the ratio of the total quantity of the respective metal content to the total quantity of imported material when computed on a dry-weight basis; i.e., free of all uncombined moisture.

Statistical Notes

1. The quantity of metal content to be reported shall be the assay quantity without deductions.

2. For the purposes of subheading 2601.11.0060, the term "coarse" refers to iron ores with a majority of individual particles having a diameter exceeding 4.75 mm.

3. For the purposes of any of the ten-digit statistical reporting numbers appearing under the eight-digit subheadings 2603.00.00, 2604.00.00, 2607.00.00, 2608.00.00, 2616.10.00, 2616.90.00, 2620.19.60, 2620.21.00, 2620.29.00 or 2620.30.00, and the ten-digit statistical reporting numbers 2620.99.7560 and 2620.99.7580 for the eight-digit subheading specifying that a named metal content is to be reported, the weight and value of such metal contained in any shipment of the ores, concentrates, slag, ash or residues entered under such subheading shall be reported under each applicable statistical reporting number. If a product covered by one of these provisions includes more than one of the named metals, it would be necessary to enter multiple ten-digit subheadings with the weight and value of each metal indicated under the appropriate ten-digit subheading.

Section V: the 3 chapters

  • Chapter 25: Salt; sulfur; earths and stone; plastering materials, lime and cement
  • Chapter 26: Ores, slag and ash (this chapter)
  • Chapter 27: Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes

Before you file

The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.

Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026. Chapter notes read November 16, 2026.