HS code 7216: Angles, shapes and sections of iron or nonalloy steel
Heading 7216 of the Harmonized Tariff Schedule of the United States reads: “Angles, shapes and sections of iron or nonalloy steel.”
It holds 18 ten digit US HTS codes under 12 international HS subheadings. Every code with a free or percent rate enters at a general duty rate of Free. No trade program lists a Free special rate here.
What a container of 7216 costs at your door
- Ports with a captured rate
- China
- ShanghaiCNSGH
- Shenzhen (Yantian)CNYTN
- QingdaoCNQIN
- GuangzhouCNGGZ
- XiamenCNXMN
- TianjinCNTSN
- South Korea
- BusanKRPUS
- Taiwan
- KaohsiungTWKHH
- Vietnam
- Ho Chi Minh CityVNSGN
- India
- Mumbai (Nhava Sheva)INBOM
- ChennaiINMAA
- Taiwan
- TaipeiTWTPE
- South Korea
- Seoul (Incheon)KRINC
- US ports from Shenzhen (Yantian)
- Los AngelesUSLAX
- New YorkUSEWR
- SavannahUSSAV
- HoustonUSHOU
- SeattleUSSEA
- OaklandUSOAK
- CharlestonUSCHS
- MiamiUSMIA
- BaltimoreUSBAL
- JacksonvilleUSJAX
Free, the general rate on every code under 7216.
| Goods Your invoice value | $60,000.00 |
| Ocean freight to a door near the port Captured October 27, 18 days, entry and ISF filing fees included | $8,269.78 |
| Duty at 0% Your HTS rate on the goods value | $0.00 |
| Section 301, China 12.5% since July 24, 2026 | $7,500.00 |
| Merchandise processing fee 0.3464% of value | $207.84 |
| Harbor maintenance fee 0.125% of value, ocean only | $75.00 |
| Single entry bond About $5.50 per $1,000, $55 minimum | $330.00 |
| Landed cost | $76,382.62 |
Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.
Every 7216 code enters at a general duty rate of Free, so the calculator starts at 0%. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.
All 18 HTS codes under heading 7216
A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.
| HTS code | Description | General | Special | Column 2 | Units | |
|---|---|---|---|---|---|---|
| 7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | ||||||
| 7216.10.00.10 | U sections | Free | None listed | 2% | kg | Price it |
| 7216.10.00.50 | Other | Free | None listed | 2% | kg | Price it |
| L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | ||||||
| 7216.21.00.00 | L sections | Free | None listed | 2% | kg | Price it |
| 7216.22.00.00 | T sections | Free | None listed | 2% | kg | Price it |
| U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | ||||||
| 7216.31.00.00 | U sections | Free | None listed | 2% | kg | Price it |
| 7216.32.00.00 | I sections (standard beams) | Free | None listed | 2% | kg | Price it |
| 7216.33.00H sections | ||||||
| 7216.33.00.30 | Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm | Free | None listed | 2% | kg | Price it |
| 7216.33.00.60 | Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm | Free | None listed | 2% | kg | Price it |
| 7216.33.00.90 | Other | Free | None listed | 2% | kg | Price it |
| 7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | ||||||
| 7216.40.00.10 | L sections | Free | None listed | 2% | kg | Price it |
| 7216.40.00.50 | Other | Free | None listed | 2% | kg | Price it |
| 7216.50.00.00 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | Free | None listed | 2% | kg | Price it |
| Angles, shapes and sections, not further worked than cold-formed or cold-finished | ||||||
| 7216.61.00.00 | Obtained from flat-rolled products | Free | None listed | 20% | kg | Price it |
| 7216.69.00.00 | Other | Free | None listed | 20% | kg | Price it |
| Other | ||||||
| 7216.91.00Cold-formed or cold-finished from flat-rolled products | ||||||
| 7216.91.00.10 | Drilled, notched, punched or cambered | Free | None listed | 20% | kg | Price it |
| 7216.91.00.90 | Other | Free | None listed | 20% | kg | Price it |
| 7216.99.00Other | ||||||
| 7216.99.00.10 | Drilled, notched, punched or cambered | Free | None listed | 20% | kg | Price it |
| 7216.99.00.90 | Other | Free | None listed | 20% | kg | Price it |
HS subheadings under 7216
Heading 7216 splits into 12 six digit subheadings, the international level of the code; the United States adds four digits to each.
| HS subheading | Description | HTS codes | General duty |
|---|---|---|---|
| 7216.10 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | 2 | Free |
| 7216.21 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: L sections | 1 | Free |
| 7216.22 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: T sections | 1 | Free |
| 7216.31 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: U sections | 1 | Free |
| 7216.32 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: I sections (standard beams) | 1 | Free |
| 7216.33 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: H sections | 3 | Free |
| 7216.40 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | 2 | Free |
| 7216.50 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | 1 | Free |
| 7216.61 | Angles, shapes and sections, not further worked than cold-formed or cold-finished: Obtained from flat-rolled products | 1 | Free |
| 7216.69 | Angles, shapes and sections, not further worked than cold-formed or cold-finished: Other | 1 | Free |
| 7216.91 | Other: Cold-formed or cold-finished from flat-rolled products | 2 | Free |
| 7216.99 | Other: Other | 2 | Free |
Duty rates under heading 7216 at a glance
18 codes enter free of general duty. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs from 2% to 20%. The entry reports quantity in kg.
Trade programs in the special column
No code under heading 7216 lists a special rate under a trade program: goods pay the general rate, or the column 2 rate where it applies.
Other headings in chapter 72
The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 72, iron and steel, holds 29 headings: see all of chapter 72.
- 7213: Bars and rods, hot-rolled, in irregularly wound coils (12 codes, Free)
- 7214: Other bars and rods of iron or nonalloy steel (18 codes, Free)
- 7215: Other bars and rods of iron or nonalloy steel (12 codes, Free)
- 7217: Wire of iron or nonalloy steel (48 codes, Free)
- 7218: Stainless steel in ingots or other primary forms (9 codes, Free)
- 7219: Flat-rolled products of stainless steel (76 codes, Free)
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.