HS code 7208: Flat-rolled products of iron or nonalloy steel
Heading 7208 of the Harmonized Tariff Schedule of the United States reads: “Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.”
It holds 32 ten digit US HTS codes under 14 international HS subheadings. Every code with a free or percent rate enters at a general duty rate of Free. No trade program lists a Free special rate here.
What a container of 7208 costs at your door
- Ports with a captured rate
- China
- ShanghaiCNSGH
- Shenzhen (Yantian)CNYTN
- QingdaoCNQIN
- GuangzhouCNGGZ
- XiamenCNXMN
- TianjinCNTSN
- South Korea
- BusanKRPUS
- Taiwan
- KaohsiungTWKHH
- Vietnam
- Ho Chi Minh CityVNSGN
- India
- Mumbai (Nhava Sheva)INBOM
- ChennaiINMAA
- Taiwan
- TaipeiTWTPE
- South Korea
- Seoul (Incheon)KRINC
- US ports from Shenzhen (Yantian)
- Los AngelesUSLAX
- New YorkUSEWR
- SavannahUSSAV
- HoustonUSHOU
- SeattleUSSEA
- OaklandUSOAK
- CharlestonUSCHS
- MiamiUSMIA
- BaltimoreUSBAL
- JacksonvilleUSJAX
Free, the general rate on every code under 7208.
| Goods Your invoice value | $60,000.00 |
| Ocean freight to a door near the port Captured October 27, 18 days, entry and ISF filing fees included | $8,269.78 |
| Duty at 0% Your HTS rate on the goods value | $0.00 |
| Section 301, China 12.5% since July 24, 2026 | $7,500.00 |
| Merchandise processing fee 0.3464% of value | $207.84 |
| Harbor maintenance fee 0.125% of value, ocean only | $75.00 |
| Single entry bond About $5.50 per $1,000, $55 minimum | $330.00 |
| Landed cost | $76,382.62 |
Section 301 for China: 12.5% on top of the HTS rate, in force since July 24, 2026. Duties and fees as of October 25, 2026. Duty and fees are charged on the goods value, not on freight. Warp is not a customs broker; confirm your product’s duty rate with yours.
Every 7208 code enters at a general duty rate of Free, so the calculator starts at 0%. The receipt adds the 2026 Section 301 rate for the origin you pick and Warp’s captured freight for the lane.
All 32 HTS codes under heading 7208
A code without a rate of its own takes the rate of the eight digit line above it. Price it puts the code and its rate in the calculator above.
| HTS code | Description | General | Special | Column 2 | Units | |
|---|---|---|---|---|---|---|
| 7208.10In coils, not further worked than hot-rolled, with patterns in relief | ||||||
| 7208.10.15.00 | Pickled | Free | None listed | 0.4¢/kg + 20% | kg | Price it |
| Other | ||||||
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | Free | None listed | 20% | kg | Price it |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | Free | None listed | 20% | kg | Price it |
| Other, in coils, not further worked than hot-rolled, pickled | ||||||
| 7208.25Of a thickness of 4.75 mm or more | ||||||
| 7208.25.30.00 | Of high-strength steel | Free | None listed | 20% | kg | Price it |
| 7208.25.60.00 | Other | Free | None listed | 0.4¢/kg + 20% | kg | Price it |
| 7208.26.00Of a thickness of 3 mm or more but less than 4.75 mm | ||||||
| 7208.26.00.30 | High-strength steel | Free | None listed | 0.4¢/kg + 20% | kg | Price it |
| 7208.26.00.60 | Other | Free | None listed | 0.4¢/kg + 20% | kg | Price it |
| 7208.27.00Of a thickness of less than 3 mm | ||||||
| High-strength steel | ||||||
| 7208.27.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | Free | None listed | 0.4¢/kg + 20% | kg | Price it |
| 7208.27.00.45 | Other | Free | None listed | 0.4¢/kg + 20% | kg | Price it |
| 7208.27.00.60 | Other | Free | None listed | 0.4¢/kg + 20% | kg | Price it |
| Other, in coils, not further worked than hot-rolled | ||||||
| 7208.36.00Of a thickness exceeding 10 mm | ||||||
| 7208.36.00.30 | High-strength steel | Free | None listed | 20% | kg | Price it |
| 7208.36.00.60 | Other | Free | None listed | 20% | kg | Price it |
| 7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mm | ||||||
| 7208.37.00.30 | High-strength steel | Free | None listed | 20% | kg | Price it |
| 7208.37.00.60 | Other | Free | None listed | 20% | kg | Price it |
| 7208.38.00Of a thickness of 3 mm or more but less than 4.75 mm | ||||||
| 7208.38.00.15 | High-strength steel | Free | None listed | 20% | kg | Price it |
| Other | ||||||
| 7208.38.00.30 | With untrimmed edges | Free | None listed | 20% | kg | Price it |
| 7208.38.00.90 | Other | Free | None listed | 20% | kg | Price it |
| 7208.39.00Of a thickness of less than 3 mm | ||||||
| High-strength steel | ||||||
| 7208.39.00.20 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | Free | None listed | 20% | kg | Price it |
| 7208.39.00.25 | Other | Free | None listed | 20% | kg | Price it |
| Other | ||||||
| 7208.39.00.30 | With untrimmed edges | Free | None listed | 20% | kg | Price it |
| 7208.39.00.90 | Other | Free | None listed | 20% | kg | Price it |
| 7208.40Not in coils, not further worked than hot-rolled, with patterns in relief | ||||||
| 7208.40.30Of a thickness of 4.75 mm or more | ||||||
| 7208.40.30.30 | Of a thickness exceeding 10 mm | Free | None listed | 20% | kg | Price it |
| 7208.40.30.60 | Other | Free | None listed | 20% | kg | Price it |
| 7208.40.60Of a thickness of less than 4.75 mm | ||||||
| 7208.40.60.30 | Of a thickness less than 3 mm | Free | None listed | 20% | kg | Price it |
| 7208.40.60.60 | Other | Free | None listed | 20% | kg | Price it |
| Other, not in coils, not further worked than hot-rolled | ||||||
| 7208.51.00Of a thickness exceeding 10 mm | ||||||
| 7208.51.00.30 | Universal mill plate | Free | None listed | 20% | kg | Price it |
| Other | ||||||
| 7208.51.00.45 | Of high-strength steel | Free | None listed | 20% | kg | Price it |
| 7208.51.00.60 | Other | Free | None listed | 20% | kg | Price it |
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | None listed | 20% | kg | Price it |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | None listed | 20% | kg | Price it |
| 7208.54.00.00 | Of a thickness of less than 3 mm | Free | None listed | 20% | kg | Price it |
| 7208.90.00.00 | Other | Free | None listed | 20% | kg | Price it |
HS subheadings under 7208
Heading 7208 splits into 14 six digit subheadings, the international level of the code; the United States adds four digits to each.
| HS subheading | Description | HTS codes | General duty |
|---|---|---|---|
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief | 3 | Free |
| 7208.25 | Of a thickness of 4.75 mm or more | 2 | Free |
| 7208.26 | Other, in coils, not further worked than hot-rolled, pickled: Of a thickness of 3 mm or more but less than 4.75 mm | 2 | Free |
| 7208.27 | Other, in coils, not further worked than hot-rolled, pickled: Of a thickness of less than 3 mm | 3 | Free |
| 7208.36 | Other, in coils, not further worked than hot-rolled: Of a thickness exceeding 10 mm | 2 | Free |
| 7208.37 | Other, in coils, not further worked than hot-rolled: Of a thickness of 4.75 mm or more but not exceeding 10 mm | 2 | Free |
| 7208.38 | Other, in coils, not further worked than hot-rolled: Of a thickness of 3 mm or more but less than 4.75 mm | 3 | Free |
| 7208.39 | Other, in coils, not further worked than hot-rolled: Of a thickness of less than 3 mm | 4 | Free |
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief | 4 | Free |
| 7208.51 | Other, not in coils, not further worked than hot-rolled: Of a thickness exceeding 10 mm | 3 | Free |
| 7208.52 | Other, not in coils, not further worked than hot-rolled: Of a thickness of 4.75 mm or more but not exceeding 10 mm | 1 | Free |
| 7208.53 | Other, not in coils, not further worked than hot-rolled: Of a thickness of 3 mm or more but less than 4.75 mm | 1 | Free |
| 7208.54 | Other, not in coils, not further worked than hot-rolled: Of a thickness of less than 3 mm | 1 | Free |
| 7208.90 | Other | 1 | Free |
Duty rates under heading 7208 at a glance
32 codes enter free of general duty. The column 2 rate, for goods from the few countries without normal trade relations with the United States, runs at 20%. The entry reports quantity in kg.
Trade programs in the special column
No code under heading 7208 lists a special rate under a trade program: goods pay the general rate, or the column 2 rate where it applies.
Other headings in chapter 72
The right heading is often decided by material, use or how the goods are made, so check the ones beside it. Chapter 72, iron and steel, holds 29 headings: see all of chapter 72.
- 7205: Granules and powders, of pig iron, spiegeleisen, iron or steel (3 codes, Free)
- 7206: Iron and nonalloy steel in ingots or other primary forms (2 codes, Free)
- 7207: Semifinished products of iron or nonalloy steel (9 codes, Free)
- 7209: Flat-rolled products of iron or nonalloy steel (22 codes, Free)
- 7210: Flat-rolled products of iron or nonalloy steel (21 codes, Free)
- 7211: Flat-rolled products of iron or nonalloy steel (25 codes, Free)
Before you file
The importer is responsible for the classification it declares, and a licensed customs broker confirms it. Warp is not a customs broker, and these pages are not customs advice. The rates here are the schedule’s own columns: additional duties that depend on the country of origin, such as Section 301, sit in chapter 99 and are not in them, and neither are the entry fees. The landed cost calculator adds the ones it covers, and the HTS code lookup searches every line by product.
Source: Harmonized Tariff Schedule of the United States, US International Trade Commission, Revision 23 (2026). Codes, descriptions, duty rates and units read November 14, 2026.